Colour Temperature
Energy Rating
Light Output
Wall Lights
Vireo LED Stick Wall Light
Brushed Gold, Ambient Backlight — Warm glow framed in brushed luxury
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-BRS-0485

A Sculptural Line of Light
Ambient Backlight
Light washes backwards for atmospheric wall glow
Integrated LED
No bulbs to buy or replace
Warm 3000K
Cosy warm white for relaxing spaces
The fitting
- Material
- Metal
- Width
- 60 mm
- Lampholder
- Integrated LED
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 3 years
Full specification
Physical
- Finish
- Brushed Gold
- Height
- 500 mm
- Depth
- 100 mm
Electrical
- Wattage
- 13 W
- Bulb included
- No — sold separately
- Dimmable
- No
- Voltage
- 220-240V
- Electrical class
- Class II
Light output
- Brightness
- 690 lumens
- Colour temperature
- 3000K
- Efficacy
- 53.1 lm/W
- Energy rating
- G
Installation
- Mounting
- Wall · Surface
- Electrician
- Recommended — hardwired
Cover
- Returns
- 30 days
- Pack quantity
- 1

Vertical Ambient Wall Wash
The slim 50cm LED strip casts a warm glow backwards onto the wall, creating a soft vertical halo of ambient light. Perfect for adding atmospheric accent lighting to hallways, living rooms or bedrooms without harsh glare.
- Direction
- Backlight
- Mounting height
- 1.5–1.8m
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Hotel
- Restaurant
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
1× Installation instructions and warranty information
- Wall mount
- Surface
Questions
Does the Vireo LED stick wall light require an electrician to install?
Yes, this is a hardwired wall light and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your mains electrical supply and cannot simply be plugged in. Installation involves fixing the circular base plate to the wall and making permanent electrical connections, so professional installation is both required and recommended for safety.
Can this wall light be used with a dimmer switch?
No, the Vireo is not dimmable. The integrated LED module operates at a fixed output of 690 lumens and cannot be controlled by a dimmer switch. If you install it on a circuit with an existing dimmer, you'll need to replace the switch with a standard on/off switch to avoid compatibility issues or damage to the LED driver.
What colour temperature does this wall light produce?
This fitting emits a warm white light at 3000K, which creates a cosy, inviting atmosphere similar to traditional halogen lighting. At 690 lumens output from the 13W integrated LED, it provides gentle ambient illumination rather than bright task lighting, making it ideal for hallways, living rooms, and bedrooms where you want a relaxing glow.
Can I replace the LED bulb when it eventually fails?
No, this wall light uses an integrated LED module rather than a replaceable bulb. The LED is built permanently into the fitting and is designed to last many years of typical use. If the LED does eventually fail, the entire unit would need replacing, though this is covered under the 3-year manufacturer's warranty.
How far does the Vireo stick out from the wall?
The fitting has a depth of 100mm from the wall, with the circular base anchoring the slender 500mm tall vertical profile. The width is just 60mm, making it a relatively slim design that won't protrude too far into narrow hallways or passageways whilst still creating the signature backlit wall wash effect.
Is this wall light suitable for bathrooms?
No, the Vireo has an IP20 rating which means it's only suitable for dry indoor locations. It offers no protection against moisture or water ingress, so it cannot be safely installed in bathrooms or any other areas where it might be exposed to splashes or high humidity. For bathrooms, you'd need a fitting rated at least IP44 or higher depending on the zone.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
