Renzo

Yes, this is a Class I hardwired wall light that must be installed by a qualified electrician in compliance with Part P of the Building Regulations. The fitting requires connection to mains electricity and must be properly earthed. If you're mounting it outdoors, ensure all cable entries are properly sealed to maintain the IP65 rating.

Yes, the Renzo has an IP65 rating, meaning it's fully protected against dust ingress and water jets from any direction. This makes it suitable for exposed outdoor walls, patios, porches, and gardens where it will be subjected to rain and the elements. The aluminium and glass construction is designed to withstand outdoor conditions.

No, this fitting uses an integrated LED module rather than replaceable bulbs. The 13W LED is built into the unit and designed to last for many years of normal use (typically 20,000-30,000 hours). If the LED eventually fails, the entire fitting would need to be replaced, though this is unlikely within the normal lifespan of the product.

The specifications don't indicate dimming capability, so this fitting should be assumed to be non-dimmable unless connected to a compatible trailing-edge dimmer (check with the manufacturer). The light emits a warm white colour temperature of 3000K, which provides a soft, welcoming glow ideal for residential outdoor lighting and creating ambience around doorways and patios.

The Renzo measures 172mm wide, 141mm high, and projects 85mm from the wall. These compact dimensions make it suitable for most residential outdoor walls without overwhelming smaller spaces. Ensure you have adequate clearance around door frames or windows if mounting near these features.

Yes, this is described as an adjustable wall light, meaning the light head can typically be angled or rotated to direct the beam where needed. This allows you to highlight specific features, illuminate pathways, or reduce glare by adjusting the angle after installation. The exact range of adjustment will depend on the fitting's mechanical design.