Colour Temperature
Energy Rating
Light Output
Light Bulbs
Lumara XL E27 LED Spiral Filament Amber Glass Bulb
Dimmable, Very Warm White — Candlelit warmth with sculptural presence
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: BUL-MIX-0171

Warmth That Draws You In
1800K Extra Warm
Candlelight glow for intimate ambience
Fully Dimmable
Adjust brightness to set the mood
Spiral Filament Design
Elegant decorative feature when illuminated

The fitting
- Material
- Glass
- Lampholder
- E27 ES
- IP rating
- IP20 · Indoor & Outdoor
- Warranty
- 2 years
Full specification
Physical
- Finish
- Amber
- Height
- 140 mm
- Diameter
- 95 mm
Electrical
- Wattage
- 4 W
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
Light output
- Brightness
- 250 lumens
- Colour temperature
- 1800K
- Colour rendering
- CRI 80
- Efficacy
- 62.5 lm/W
- Rated life
- 15000 hours
- Energy rating
- G
Installation
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Warm Omnidirectional Filament Glow
The exposed spiral filament radiates soft, amber-toned light in all directions, creating an intimate, candlelit ambience. Best suited for decorative pendant fittings where the bulb itself becomes a feature, casting gentle shadows and a nostalgic glow throughout the space.
- Direction
- Omnidirectional
- Mounting height
- 1.8–2.4m
Works well in
- Living Room
- Dining Room
- Bedroom
- Restaurant
- Bar / Café
- Hotel
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Instruction manual
- Difficulty: easy
Questions
Is the Lumara XL E27 bulb compatible with dimmer switches?
Yes, this bulb is fully dimmable and works with most standard dimmer switches. For best results, use a trailing-edge LED-compatible dimmer rather than an older resistive dimmer designed for incandescent bulbs. If you experience flickering or a limited dimming range, the dimmer switch itself may need upgrading to an LED-specific model.
What colour temperature does this bulb produce and is it suitable for living rooms?
The Lumara XL emits an extra warm white light at 1800K, which matches the amber glow of candlelight or traditional filament bulbs. This creates a cosy, intimate atmosphere ideal for living rooms, bedrooms, or dining areas where you want a relaxed, vintage aesthetic. It's significantly warmer than standard warm white bulbs (typically 2700K-3000K), so expect a noticeably amber tone.
Can I use this E27 spiral filament bulb in a bathroom or outdoor light fitting?
No, this bulb has an IP20 rating, meaning it's only suitable for dry indoor locations and offers no protection against moisture. It cannot be safely used in bathroom zones or any outdoor setting. For bathrooms, you'd need a fitting rated at least IP44, and for outdoor use, IP65 or higher is recommended.
How much energy does the Lumara XL bulb consume compared to a traditional filament bulb?
This LED bulb uses just 4 watts of power while producing a warm, atmospheric glow comparable to a traditional 25-30 watt incandescent bulb. Over its lifetime, you'll save considerably on electricity costs compared to older filament technology, while still enjoying the classic spiral filament aesthetic. The low wattage also means minimal heat output.
What is the actual bulb size of the Lumara XL and will it fit inside enclosed pendant shades?
While exact dimensions aren't provided in the specifications, the 'XL' designation indicates this is a larger decorative bulb with an oversized spiral filament design. It's best suited to open pendants, cage lights, or exposed fittings where the bulb itself is a design feature. If you're planning to use it inside a closed shade, check the shade's internal dimensions carefully as XL bulbs can be 125-140mm tall.
Is the E27 base a standard UK fitting and can I install it myself?
Yes, E27 (also called ES or Edison Screw) is a common UK bulb fitting with a 27mm screw base. If you're simply replacing a bulb in an existing lamp or pendant, this is straightforward DIY requiring no electrical qualifications—just ensure the power is off first. However, if you're installing a new pendant fitting itself, this is notifiable work under Part P Building Regulations and should be carried out by a qualified electrician.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
