Colour Temperature
Energy Rating
Light Output
Light Bulbs
Lumen 7W GLS LED Filament Bulb
Dimmable, Warm White, Clear Glass — Classic warmth for everyday spaces
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: BUL-CLR-0234
Classic Form, Modern Efficiency
806 Lumens
Bright 60W equivalent for everyday use
Fully Dimmable
Adjust brightness to suit any mood
25,000 Hour Life
Around 13 years at 5 hours daily
The fitting
- Material
- Nickel / Glass
- Lampholder
- E27 ES
- IP rating
- IP20 · Indoor & Outdoor
- Warranty
- 2 years
Full specification
Physical
- Finish
- Clear
- Height
- 105 mm
- Diameter
- 60 mm
- Weight
- 0.03 kg
Electrical
- Wattage
- 7 W
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
Light output
- Brightness
- 806 lumens
- Colour temperature
- 2700K
- Colour rendering
- CRI 80
- Beam angle
- 360°
- Efficacy
- 115.14 lm/W
- Rated life
- 25000 hours
- Energy rating
- E
Installation
- Mounting
- Recessed · Recessed
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
Full 360° Omnidirectional Glow
The exposed filament spreads warm white light evenly in all directions, creating a soft ambient fill that illuminates the entire room. Perfect for pendant fittings, table lamps, and open shades where the bulb itself becomes a decorative feature.
- Direction
- Omnidirectional
- Mounting height
- Ceiling height or 1.8–2.4m
Works well in
- Living Room
- Bedroom
- Dining Room
- Hallway
- Home Office
- Restaurant
- Hotel
- Bathroom
- Kitchen
- Stairway
- Outdoor
- Patio
- Garden
- Porch / Entrance
- Pathway
- Driveway
- Poolside
- Office
- Retail
- Gym / Studio
- Bar / Café
- Gallery / Museum
- Spa / Salon
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Instruction leaflet
- Recessed mount
- Recessed
- Difficulty: easy
Questions
Is this LED filament bulb compatible with dimmer switches?
Yes, the Lumen 7W GLS LED filament bulb is fully dimmable. It works with most leading-edge and trailing-edge dimmer switches, though performance varies by dimmer model. If you experience flickering or limited range, you may need to replace older dimmer switches with LED-compatible versions.
What is the actual brightness of this 7W LED bulb compared to traditional bulbs?
This bulb produces 806 lumens, which is equivalent to a traditional 60W incandescent bulb. With a warm white colour temperature of 2700K and a CRI of 80, it delivers a comfortable, natural-looking light suitable for living rooms, bedrooms, and dining areas.
Can I use this bulb outdoors in a porch or garden light fitting?
This bulb is rated IP20, which means it's only protected against solid objects and has no water resistance. It can be used outdoors only if installed within a fully weatherproof enclosed fitting that protects the bulb itself from moisture and rain. For exposed outdoor locations, choose a bulb with a minimum IP44 rating.
Will this E27 LED bulb fit my existing lamp or ceiling fitting?
Yes, if your fitting has a standard E27 Edison Screw (ES) socket. The bulb measures 105mm in height and 60mm in diameter, so check your lampshade or fitting has sufficient clearance. The clear glass design makes it ideal for exposed fittings where the bulb is visible.
How long will this LED filament bulb last before needing replacement?
The Lumen has a rated lifespan of 25,000 hours. If used for an average of 3 hours per day, this translates to approximately 22 years of service. The bulb also comes with a 2-year manufacturer's warranty for added peace of mind.
Do I need an electrician to install this bulb or can I fit it myself?
This is a simple screw-in bulb replacement that requires no electrical work. You can install it yourself by switching off the light, allowing any existing bulb to cool, unscrewing the old bulb, and screwing in the new one. No Part P certification or electrician is required for bulb replacement.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
