Aurelia

Yes, installation should be carried out by a qualified electrician as this is a Class I hardwired ceiling fitting. Under Part P of the Building Regulations in England and Wales, fixed electrical work in kitchens, bathrooms, and outdoors must be certified, and many electricians recommend professional installation for all ceiling lights to ensure safe connection to your mains circuit.

Yes, the Aurelia is fully dimmable, but you'll need a trailing-edge (LED-compatible) dimmer switch for smooth, flicker-free performance. Standard rotary dimmers designed for incandescent bulbs may cause buzzing or flickering. Check that your dimmer is rated for LED loads and compatible with the 36W power draw of this fitting.

No, this fitting uses integrated LEDs which are built into the unit and cannot be replaced separately. Integrated LEDs typically last 15,000–25,000 hours (around 15–20 years of normal use), after which the entire fitting would need replacing. The advantage is a slimmer, more seamless design without visible bulb sockets.

No, the Aurelia has an IP20 rating, which means it offers no protection against moisture and is suitable for dry indoor areas only. Bathrooms require fittings rated IP44 or higher depending on the zone, so this light should be installed in living rooms, bedrooms, hallways, or dining rooms instead.

This fitting emits warm white light starting at 2700K, which creates a cosy, inviting atmosphere similar to traditional incandescent bulbs. It's ideal for living rooms, bedrooms, and dining areas where you want a relaxing, homely ambiance rather than the cooler, clinical tones of daylight white LEDs.

At 36W, the Aurelia provides ample illumination for medium to large rooms, typically up to around 20–25 square metres, depending on ceiling height and your preferred brightness level. It works well as the main ceiling light in living rooms, larger bedrooms, or open-plan kitchen diners, especially when paired with a dimmer for adjustable ambiance.