Harlow Industrial Wall Spot Light — Antique Brass, Switched
£40
Skip to product information
Recommended bulbsSold separately · GU10 · 50W max
Materials
Metal
IP20 Indoor
Click to zoom
Wall Lights
Harlow Industrial Wall Spot Light
Antique Brass, Switched — Focused brass light with factory charm
£40Includes VATKlarna.3 × £13 interest-free
Secure checkout
Estimated delivery
7 – 9 September
Quality-checked before dispatch · Free UK delivery over £75
Key features−
Key Features
Antique brass finish adds industrial character to any room
Fully adjustable head directs light exactly where needed
Convenient rocker switch on fitting for easy control
Compatible with energy-saving LED GU10 bulbs
Spring coil stem creates authentic vintage workshop style
IP20 IndoorMetal30-day returns
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-BRS-0480
01
Workshop Spirit, Refined Finish
Fully Adjustable Head
Direct light exactly where you need it
Integrated On/Off Switch
Control at your fingertips, no wiring needed
Antique Brass Finish
Warm industrial character for distinctive interiors
02
The fitting
- Material
- Metal
- Width
- 100 mm
- Lampholder
- GU10 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
Full specification
Physical
- Finish
- Antique Brass
- Height
- 130 mm
- Depth
- 140 mm
Electrical
- Max wattage
- 50 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
Installation
- Mounting
- Wall · Surface
- Electrician
- Recommended — hardwired
Cover
- Returns
- 30 days
- Pack quantity
- 1
03
Fully Adjustable Directional Beam
The adjustable head directs a focused spotlight exactly where you need it, creating concentrated pools of light ideal for highlighting artwork, architectural features, or task areas. The narrow GU10 beam can be angled in any direction to adapt to your changing lighting needs.
- Direction
- Adjustable Spot
- Mounting height
- 1.5–2.0m
Works well in
- Living Room
- Bedroom
- Hallway
- Home Office
- Kitchen
- Restaurant
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
04
Why we chose it
CHOSEN, NOT STOCKED
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Selected by Enso for proportion, finish and light quality — and checked before it was allowed to stay.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.
05
What's involved
Electrician requiredHardwired.
Wall fixingsScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× Wall spot light fitting
1× Pack of mounting screws and plugs
1× Instruction manual
1× Pack of mounting screws and plugs
1× Instruction manual
- Wall mount
- Surface
06
Questions
Does the Harlow antique brass wall spot require an electrician to install?
Yes, the Harlow is hardwired and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your mains wiring, typically via a BESA box or similar mounting point. While the integrated on/off switch means you won't need additional wiring for separate switching, the initial installation is notifiable electrical work.
What type of bulb does this wall spotlight take and is it included?
The Harlow uses a single GU10 bulb with a maximum wattage of 50W, which is not included with the fitting. You can choose any GU10 lamp to suit your needs—whether warm white (2700K-3000K) for a cosy feel, cool white (4000K+) for task lighting, or daylight tones. GU10 bulbs are widely available and simply twist-lock into place without tools.
Can I use this spotlight with a dimmer switch?
Dimming capability depends entirely on the GU10 bulb you install, not the fitting itself. If you choose a dimmable GU10 LED bulb and have a compatible LED dimmer switch installed, the Harlow can be dimmed. However, the integrated on/off switch on the fitting will function independently of any wall-mounted dimmer, so you'll control dimming at the wall and on/off at the fixture.
What are the dimensions of the Harlow wall spot and how far does it project from the wall?
The fitting measures 130mm in height, 100mm in width, and projects 140mm from the wall when mounted. The adjustable head and spring coil stem allow you to direct the beam in multiple directions, but you should account for the full 140mm depth when planning installation above furniture, shelving, or in narrow hallways.
Is this antique brass spotlight suitable for bathroom use?
No, the Harlow has an IP20 rating, which means it's not protected against moisture and is only suitable for dry indoor locations. For bathroom installation, you would need a fitting rated IP44 or higher depending on the zone. This spotlight is ideal for living rooms, bedrooms, hallways, or kitchen areas away from direct water exposure.
How many lumens or how bright is this industrial wall light?
The brightness depends entirely on which GU10 bulb you install, as bulbs are sold separately. A typical 5W GU10 LED produces around 400 lumens (suitable for accent or reading light), while a 7W version offers approximately 600 lumens for stronger task lighting. The maximum 50W rating allows for very bright halogen bulbs if preferred, though LED alternatives are more energy-efficient.
Don't forget your bulbSold separately · GU10 · 50W max
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.