Mayson LED Sensor Outdoor Aluminium Wall Light — Warm White, Dark Grey
£70
Skip to product information
Colour Temperature
Warm White
3000K
2000K
3500K
4500K
6500K
Energy Rating
A
B
C
D
E
◀ This productF
G
Light Output
853
lumens
Efficiency
121.8 lm/W
Power
7W
Beam
120°
AccentTaskRoom
Click to zoom
Outdoor Lighting
Mayson LED Sensor Outdoor Aluminium Wall Light
Warm White, Dark Grey — Welcoming light that greets you home
£70Includes VATKlarna.3 × £23 interest-free
Secure checkout
Estimated delivery
7 – 9 September
Quality-checked before dispatch · Free UK delivery over £75
Key features−
Key Features
Motion sensor automatically lights your way when needed
Warm white LED creates welcoming glow for entrances
Weather-resistant IP44 rated for reliable outdoor performance
Stylish dark grey aluminium complements any home exterior
Energy-efficient 7W integrated LED bulb included
IP44 OutdoorAluminium and glass2 yr warranty30-day returns
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: OWL-BLK-0107
01
Smart Light, Effortless Welcome
Built-in PIR sensor
Automatically lights up when motion detected
IP44 Rated
Weatherproof for outdoor walls and porches
Integrated LED
No bulbs to buy or replace
02
The fitting
- Material
- Aluminium and glass
- Width
- 160 mm
- Lampholder
- Integrated LED
- IP rating
- IP44 · Outdoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Dark grey
- Shape
- Round, Cylindrical
- Height
- 187 mm
- Depth
- 180 mm
Electrical
- Wattage
- 7 W
- Bulb included
- Yes
- Dimmable
- No
- Voltage
- 220-240V
- Electrical class
- Class I
Light output
- Brightness
- 853 lumens
- Colour temperature
- 3000K
- Colour rendering
- CRI 80
- Beam angle
- 120°
- Efficacy
- 121.86 lm/W
- Rated life
- 30000 hours
- Energy rating
- E
Installation
- Mounting
- Wall · Surface
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
- Driver included
- Yes
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
03
Focused Downward Security Beam
Directs a concentrated pool of warm white light downward to illuminate doorways, paths and entrances. The sensor-activated beam provides clear visibility exactly where needed without wasted light spill.
- Direction
- Downlight
- Mounting height
- 1.8–2.4m
Works well in
- Porch / Entrance
- Patio
- Garden
- Pathway
- Hotel
- Restaurant
- Outdoor
04
Why we chose it
CHOSEN, NOT STOCKED
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Selected by Enso for proportion, finish and light quality — and checked before it was allowed to stay.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.
05
What's involved
Electrician requiredHardwired. Installation difficulty: easy.
Wall fixingsScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× LED sensor wall light
1× Mounting bracket
1× Pack of screws & plugs
1× Instruction manual
1× Mounting bracket
1× Pack of screws & plugs
1× Instruction manual
- Wall mount
- Surface
- Difficulty: easy
06
Questions
Does the Mayson LED sensor outdoor wall light require an electrician to install?
Yes, this is a mains-powered Class I fitting that must be installed by a qualified electrician in compliance with UK Building Regulations Part P. It requires a permanent connection to your 230V mains supply and must be properly earthed. The integrated PIR sensor means the wiring will also need to accommodate the sensor's power requirements, so professional installation is essential for safety and functionality.
Is the Mayson suitable for exposed outdoor locations or does it need shelter?
With an IP44 rating, the Mayson offers protection against splashing water from any direction but is not fully weatherproof against heavy rain or water jets. It's best suited for sheltered outdoor areas such as covered porches, under eaves, or in recessed doorways rather than completely exposed walls. For fully exposed locations subject to driving rain, you'd need an IP65-rated fitting.
Can I replace the LED bulb in the Mayson wall light if it stops working?
No, this fitting has an integrated LED module rather than a replaceable bulb. The 7W LED is built into the unit and designed to last around 25,000-30,000 hours under normal use. If the LED fails, the entire fitting would need to be replaced, though LED technology typically outlasts traditional bulbs by many years.
What are the exact dimensions of the Mayson and how far does it project from the wall?
The Mayson measures 160mm wide, 187mm tall, and projects 180mm from the wall. The 180mm depth is particularly important to consider for narrower pathways or doorways where the fitting might protrude significantly. Make sure you have adequate clearance, especially if it's being installed near gates or in areas with regular foot traffic.
How sensitive is the PIR motion sensor and can it be adjusted?
While the product includes a PIR motion sensor for automatic activation, the specifications don't detail the detection range, sensitivity settings, or adjustability options. Typical outdoor PIR sensors detect movement up to 8-12 metres, but you'd need to check the manufacturer's documentation or contact the supplier to confirm whether the Mayson's sensor can be adjusted for range, duration, or sensitivity.
Is the warm white LED dimmable with a standard dimmer switch?
The specifications don't indicate that this fitting is dimmable, and integrated LED fittings with PIR sensors are typically not compatible with dimmer switches due to the sensor circuitry. Attempting to use a dimmer with a non-dimmable LED can cause flickering, buzzing, or damage to the fitting. The light will operate at full brightness when triggered by motion detection only.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.