Velia

Yes, as this is a hardwired Class I pendant light, installation must comply with Part P of the Building Regulations in England and Wales. Unless you are a competent person registered with a scheme provider, you'll need a qualified electrician to connect it to your mains ceiling rose or BESA box and certify the work. The fitting must be earthed as it's Class I.

The Velia uses GU10 bulbs, and you'll need three in total (one per lampholder). Bulbs are not included, so you'll need to purchase them separately. Each bulb must not exceed 12W, which is typical for LED GU10s and will provide ample light for most rooms.

You can use dimmable GU10 LED bulbs, but you'll also need a compatible trailing edge dimmer switch installed on your lighting circuit. The pendant itself has no built-in dimming function, so dimming capability depends entirely on your bulbs and switch working together. Always check that your chosen bulbs are marked as dimmable.

No, the Velia has an IP20 rating, which means it's not protected against moisture and is only suitable for dry indoor environments. For bathroom use, you'd need a minimum of IP44 (or IP65 in shower zones), so this fitting should be installed in living rooms, bedrooms, dining areas, or hallways only.

Each of the three lampholders supports a maximum of 12W, giving you up to 36W total across the fitting. With modern LED GU10 bulbs, a 12W bulb typically produces around 1,000–1,200 lumens, so you can expect roughly 3,000–3,600 lumens in total—plenty of light for a dining table, kitchen island, or medium-sized room.

While specific drop length isn't listed in the specifications, cage pendant lights of this style typically suit standard UK ceiling heights of 2.4m and above. The three-cage design means it has moderate width, so ensure you have sufficient clearance above dining tables or kitchen islands—ideally 70–90cm above the surface to avoid head clearance issues.