Light Bulbs
Helix Spiral Filament E27 LED Bulb
Tinted Amber, Dimmable — Sculptural warmth in every curl
Key features−
Key Features
Delivery & Returns
UK-stocked designs — dispatched within 1–2 working days by DPD or Royal Mail.
Made-to-order pieces — hand-finished by our European makers and delivered in 10–14 days. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: BUL-AMB-0452

Sculptural Light, Day and Night
Spiral Filament Design
Sculptural amber glass statement piece
Fully Dimmable
Set the perfect mood any time
280 Lumens
Soft ambient glow for atmospheric lighting

The fitting
- Material
- Glass
- Lampholder
- E27 ES
- IP rating
- IP20 · Indoor
- Warranty
- 2 years
Full specification
Physical
- Finish
- Amber
- Height
- 142 mm
- Diameter
- 64 mm
- Weight
- 0.05 kg
Electrical
- Wattage
- 4 W
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge
- Voltage
- 220-240V
Light output
- Brightness
- 280 lumens
- Efficacy
- 70.0 lm/W
- Energy rating
- G
Installation
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Warm Omnidirectional Ambient Glow
The exposed spiral filament radiates soft, warm light in all directions through tinted amber glass, creating an inviting glow ideal for dining areas, bedrooms, and decorative pendants. At 280 lumens, it delivers gentle ambient illumination rather than task lighting, with the sculptural filament providing visual interest even when dimmed.
- Direction
- Omnidirectional
- Mounting height
- 1.2–2.4m
Works well in
- Living Room
- Bedroom
- Dining Room
- Hallway
- Restaurant
- Bar / Café
- Hotel
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Instruction leaflet
Questions
What type of dimmer switch do I need for this bulb?
The Helix requires a trailing edge dimmer switch for smooth, flicker-free dimming. Trailing edge dimmers are specifically designed for LED loads and will give you better control across the full range compared to older leading edge dimmers. If you're installing a new dimmer switch as part of fixed wiring, you'll need a qualified electrician to carry out the work in compliance with Part P Building Regulations.
Is this bulb bright enough to light a room or is it just decorative?
At 280 lumens and 4 watts, this is primarily a decorative ambient bulb rather than a main light source. It's ideal for creating mood lighting in living rooms, bedrooms, or dining areas, particularly in exposed pendants or table lamps where the sculptural filament becomes a feature. For task lighting or brighter illumination, you'd want to pair it with additional light sources or use multiple bulbs.
Will this fit a standard lamp holder?
Yes, this uses an E27 (Edison Screw) cap, which is the most common large screw fitting in the UK. It will fit any lamp, pendant, or light fitting with an E27 socket. The bulb measures 142mm in height and 64mm in diameter, so do check your shade or fitting has sufficient clearance, especially in enclosed or narrow fixtures.
Can I use this bulb in a bathroom?
No, this bulb is rated IP20, which means it's suitable for dry indoor locations only and offers no protection against moisture. Bathrooms require a minimum of IP44 (often IP65 for zones 1 and 2), so this Helix bulb should only be used in living areas, bedrooms, hallways, and other rooms without water exposure.
What colour temperature is the light and can I get it in cool white?
This bulb emits a warm white glow enhanced by the amber-tinted glass, creating a cosy, golden ambience similar to vintage incandescent bulbs. It's designed specifically for warm, atmospheric lighting. This particular model is only available in the amber finish with warm white output—it's not offered in cool white or daylight variants.
What's covered under the warranty if the bulb fails?
The Helix comes with a 2-year manufacturer's warranty covering defects in materials and workmanship. If the bulb fails during normal use within this period, you'll be entitled to a replacement. The warranty doesn't cover damage from incorrect installation, use with incompatible dimmers, or physical breakage, so do ensure you're using a trailing edge dimmer for best results.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
