Sesto

Yes, this is a hardwired ceiling light that must be installed by a qualified electrician in compliance with Part P of the Building Regulations. It's Class I (earthed) and requires connection to your mains circuit, typically via a ceiling rose or junction box. The installation difficulty is rated as moderate, and it's suitable for plasterboard, timber joist, or concrete ceilings.

You'll need 6× G9 capsule bulbs with a maximum wattage of 3W each – bulbs are not included with the fitting. G9 is a small two-pin capsule base, and at 3W maximum you'll want LED bulbs (incandescent G9 bulbs typically start at 25W and would exceed the limit). If you want dimming functionality, make sure to choose dimmable G9 LED bulbs and pair them with a trailing edge dimmer switch.

Yes, the fitting itself is dimmable, but you'll need to fit dimmable G9 LED bulbs (not included) and install a trailing edge dimmer switch on your lighting circuit. Trailing edge dimmers are specifically designed for LED loads and prevent flickering or buzzing. Both the bulbs and the dimmer switch must be dimmable-compatible for smooth operation.

The Sesto measures 860mm wide and 600mm in height (drop from ceiling), making it a substantial centrepiece suited to medium to large rooms. It works particularly well over dining tables, in spacious living rooms, or larger bedrooms where the 860mm width won't overwhelm the space. Ensure you have adequate ceiling height, as the 600mm drop means it will hang quite low.

With six 3W LED G9 bulbs fitted, you'll have a total of 18W of lighting power, which typically produces around 1,200–1,500 lumens depending on bulb efficiency. The opal white glass diffuses light softly, creating ambient rather than task lighting. This makes it ideal for mood lighting in living areas and dining rooms, though you may want additional lighting for reading or detailed tasks.

No, this fitting is rated IP20, which means it's only protected against solid objects larger than 12.5mm and has no moisture protection. It's designed for dry indoor locations only and does not meet the IP rating requirements for bathroom zones. Stick to living rooms, dining rooms, bedrooms, or hallways away from direct water exposure.