Pendant Lights
Solene Ribbed Ceiling Pendant
Glass, Antique Brass — Timeless ribbed glass with warm brass detailing
Key features−
Key Features
Delivery & Returns
UK-stocked designs — dispatched within 1–2 working days by DPD or Royal Mail.
Made-to-order pieces — hand-finished by our European makers and delivered in 10–14 days. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-BRS-0210

Where Craft Meets Quiet Light
Adjustable Drop
Adjustable chain from 500mm to 1900mm suits any ceiling height
Ribbed Glass
Fluted texture softens light into elegant vertical patterns
Antique Brass
Warm metal frame with adjustable chain to suit any space

The fitting
- Material
- Antique Brass Metal / Clear Ribbed Glass
- Width
- 200 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Antique Brass
- Shape
- Cylindrical, Lantern
- Height
- 1200 mm
- Diameter
- 200 mm
- Depth
- 200 mm
- Weight
- 2.67 kg
Electrical
- Max wattage
- 10 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class II
Light output
Installation
- Mounting
- Ceiling · Surface
- Suitable surfaces
- Plasterboard, plaster, concrete
- Cable length
- 1.4 m
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · UKCA · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Soft Vertical Light Patterns
The fluted ribbed glass refracts the bulb into soft vertical bands of warm light, casting subtle linear patterns across the ceiling and surrounding walls. The effect is most pronounced with a warm white opal or filament bulb, creating an atmosphere that feels intimate and lived-in rather than brightly lit — ideal for dining, hallway and stairwell installations.
- Direction
- Omnidirectional diffused
- Mounting height
- 1.6–2.0m above floor
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Stairway
- Restaurant
- Hotel
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Ceiling mounting plate and bracket
1× Adjustable chain (500–1900mm)
1× Gold-finish cable
1× Fixings pack (screws and wall plugs)
1× Instruction manual
- Ceiling mount
- Surface
- Difficulty: easy
Questions
Does the Mateo pendant light need an electrician to install?
Yes, the Solene is a hardwired ceiling pendant and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. It connects directly to your mains ceiling wiring, typically via a BESA box or ceiling rose. If you're replacing an existing pendant in the same position, the installation is usually straightforward, but any new wiring or circuit work requires certification.
What type of bulb does the Mateo ribbed glass pendant take?
The Solene uses a single E27 Edison Screw (ES) bulb, which is the standard large screw fitting widely available in the UK. It accepts up to 10W, so you can use LED, filament, or decorative bulbs as long as they don't exceed this wattage. The clear ribbed glass works beautifully with warm white vintage-style filament bulbs to emphasise the vertical fluting.
Can I use a dimmer switch with the Mateo pendant?
The fitting itself is compatible with dimmer switches, but whether you can dim it depends entirely on the bulb you choose. You'll need to fit a dimmable E27 LED or filament bulb and pair it with an appropriate LED-compatible dimmer switch. Always check the bulb packaging confirms it's dimmable before purchasing.
What are the dimensions of the Mateo pendant and how low does it hang?
The glass shade measures 200mm in both diameter and height, with a total drop of 1.2m from the ceiling rose to the bottom of the shade (including the 1.4m adjustable cable). The manufacturer recommends hanging it so the bottom sits 1.6–2.0m above floor level, making it ideal over dining tables, in stairwells, or in rooms with standard to high ceilings.
Is the Mateo pendant suitable for bathrooms?
No, the Solene has an IP20 rating, which means it's only suitable for dry indoor locations and offers no protection against moisture. It cannot be used in bathrooms or any areas where it might be exposed to steam or water splashes. For bathroom lighting, you'll need fittings rated IP44 or higher depending on the zone.
What size room works best with the Mateo ribbed glass pendant?
With a 200mm diameter and single 10W lampholder, the Solene works best as ambient or accent lighting in small to medium spaces, or as task lighting over a dining table or kitchen island. It's particularly effective in hallways, above bedside tables, or in multiples over a longer dining table. For larger living rooms or open-plan spaces, consider clustering multiple pendants or pairing it with additional lighting.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
