Wall Lights
Galea Paintable Up/Down Light
Plaster, White — A canvas for light and architecture
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: UPD-WHT-0192

Architecture That Becomes Light
Paintable Plaster
Seamlessly disappears into your wall finish
Up/Down Light
Dramatic accent wash in both directions
Integrated LED
No bulbs to buy or replace

The fitting
- Material
- Plaster
- Width
- 200 mm
- Lampholder
- G9 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
Full specification
Physical
- Finish
- Smooth White
- Shape
- Round, Rectangular
- Height
- 85 mm
- Depth
- 120 mm
Electrical
- Max wattage
- 25 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
Installation
- Mounting
- Wall · Surface
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Cover
- Returns
- 30 days
- Pack quantity
- 1

Designed to blend into your wall
Designed to be painted in the same colour as your wall, this up/down wash recedes into the plaster so you see the light, not the fitting. Twin beams travel vertically across the surface, lifting plain walls with shadow and depth that flat overhead lighting can't reach. It works as well in a hallway or stairwell as it does flanking a fireplace or feature wall, and because the face paints over completely, it suits any colour scheme — from chalky neutrals to deep, moody tones — without needing a finish change.
- Direction
- Up + Down
- Mounting height
- 1.5–1.8m
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Stairway
- Hotel
- Gallery / Museum
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Mounting bracket
1× Pack of screws and fixings
1× Installation guide
- Wall mount
- Surface
- Difficulty: easy
Questions
Does the Galea paintable plaster wall light require an electrician to install?
Yes, as this is a mains-powered hardwired wall light, installation must comply with Building Regulations Part P in England and Wales. Unless you're a qualified electrician or competent person, you'll need to hire a registered spark to connect it safely to your mains circuit and issue the necessary certification.
Can I paint over the plaster finish on this wall light?
Yes, the Galea is designed with a paintable plaster finish so you can match it to your wall colour. Use standard emulsion paint and apply thin, even coats to avoid clogging the plaster texture. Allow the paint to fully cure before switching the light on to prevent any discolouration from heat.
What type of bulbs does this up/down wall light take?
The specifications don't list bulb type or fitting details, so you'll need to check the product packaging or manufacturer documentation upon delivery. Most plaster wall lights of this style typically use GU10 or G9 capsule bulbs, but confirm the fitting before purchasing bulbs separately.
Is this wall light suitable for use in a bathroom?
There's no IP rating provided in the specifications, which means the Galea is not certified for bathroom zones where moisture protection is required. It's best suited for dry interior spaces like hallways, living rooms, or bedrooms where splash or steam exposure isn't a concern.
What are the dimensions of the Galea paintable wall light?
Unfortunately, dimensions aren't listed in the provided specifications. For accurate measurements to check clearance and proportion in your space, please refer to the technical drawing on the product page or contact EnsoLight directly before ordering.
Can this up/down wall light be used with a dimmer switch?
Dimmability depends on both the light fitting and the bulbs you use, but the specifications don't confirm if the Galea is dimmer-compatible. If you want dimming functionality, check the manufacturer's notes and ensure you pair the fitting with dimmable LED bulbs and a compatible trailing-edge dimmer switch.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.



