Kanto LED Module & Driver — Dimmable, CRI90
£36
Skip to product information
Colour Temperature
Adjustable White
3000–4000K
2000K
3500K
4500K
6500K
Energy Rating
A
B
C
D
E
◀ This productF
G
Light Output
960
lumens
Efficiency
120.0 lm/W
Power
8W
AccentTaskRoom
Click to zoom
Light Bulbs
Kanto LED Module & Driver
Dimmable, CRI90 — Warm to neutral, beautifully rendered
£36Includes VATKlarna.3 × £12 interest-free
Secure checkout
Estimated delivery
7 – 9 September
Quality-checked before dispatch · Free UK delivery over £75
Key features−
Key Features
CRI90+ delivers true, vibrant colours in every room
Smooth dimming with standard leading-edge TRIAC dimmers
Pre-matched module and driver click together, no wiring needed
Energy-efficient 8W LED produces up to 1000 lumens
Choose warm 3000K or neutral 4000K white light
IP20 IndoorAluminium5 yr warranty30-day returns
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: BUL-WHT-0464
01
Light That Shows True Colour
High CRI 90+
True-to-life colour rendering for accurate tones
120 Lumens per Watt
Exceptional efficiency saves on running costs
5 Year Warranty
Built to last with full protection
02
The fitting
- Material
- Aluminium
- Lampholder
- Integrated LED
- IP rating
- IP20 · Indoor
- Warranty
- 5 years
Full specification
Physical
- Finish
- White
Electrical
- Wattage
- 8 W
- Bulb included
- No — sold separately
- Dimmable
- Yes · Leading edge (TRIAC)
- Voltage
- 220-240V
- Electrical class
- Class I
Light output
- Brightness
- 960 lumens
- Colour temperature
- 3000K – 4000K
- Efficacy
- 120.0 lm/W
- Energy rating
- E
Installation
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
03
Focused Downlight Beam
Delivers a concentrated pool of light directly below the fitting, ideal for task lighting over worktops, highlighting specific areas, or general ambient lighting when used in multiples. The high CRI90+ rating ensures colours appear natural and accurate.
- Direction
- Downlight
- Mounting height
- Ceiling height
Works well in
- Living Room
- Bedroom
- Dining Room
- Kitchen
- Home Office
- Office
- Retail
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
04
Why we chose it
CHOSEN, NOT STOCKED
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Selected by Enso for proportion, finish and light quality — and checked before it was allowed to stay.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.
05
What's involved
Electrician required
Wall fixingsScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× LED module
1× LED driver
1× Installation instructions
1× LED driver
1× Installation instructions
06
Questions
What type of dimmer switch do I need for the Kanto LED module?
The Kanto requires a leading edge (TRIAC) dimmer switch to operate correctly when dimming. Standard rotary or trailing edge dimmers won't be compatible and may cause flickering or buzzing. Ensure your dimmer is rated for LED loads and has a minimum load lower than 8W, as some older dimmers designed for halogen bulbs may not dim LEDs reliably at low wattages.
Do I need an electrician to install this LED module and driver?
Yes, installation must be carried out by a qualified electrician in compliance with Part P of the Building Regulations, as this is a mains-voltage hardwired Class I fitting. The module and driver connect directly to your 230V mains supply and require proper earthing. DIY installation is not permitted unless you are a competent person registered with a self-certification scheme.
Can I use this module in a bathroom or ensuite?
No, the Kanto has an IP20 rating which means it offers no protection against moisture and is unsuitable for bathrooms. For bathroom zones, you'll need a fitting rated at least IP44 (IP65 for shower zones). This module is designed for dry indoor locations only, such as living rooms, bedrooms, hallways and kitchens.
What's the difference between 3000K and 4000K, and which should I choose?
3000K produces a warm white light with a slightly golden tone, ideal for creating cosy atmospheres in living rooms, bedrooms and dining areas. 4000K delivers a neutral white that's crisper and more energising, better suited to kitchens, studies and task-oriented spaces. Both colour temperatures offer the same CRI90+ colour rendering, so your choice depends purely on the mood and function of the room.
How bright is 960 lumens, and what size room will it light?
At 960 lumens, this 8W module produces roughly the equivalent of a traditional 60-75W incandescent bulb. It's suitable for accent lighting, task lighting over worktops, or supplementary illumination in smaller rooms up to around 8-10 square metres. For primary lighting in larger living spaces, you'd typically install multiple modules or combine with other light sources.
Can I replace just the LED module if it fails, or do I need to replace the whole unit?
The Kanto is sold as a complete module and driver kit, and both components are replaceable separately if one fails. The LED module itself is integrated (non-replaceable bulb), so if the LEDs fail you'd replace the entire module unit rather than individual bulbs. The fitting is covered by a 5-year warranty, so any manufacturing faults within that period would be covered.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.