Luminar

Yes, this is a hardwired Class I fitting and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The Luminar connects directly to mains wiring (typically via a BESA box or back box) and requires an earth connection, so it's not suitable for DIY installation unless you're a competent person under Part P.

The Luminar takes a single GU10 bulb up to 60W maximum, though we'd recommend a 5-7W LED GU10 for most applications (equivalent to 35-50W halogen output). The bulb is not included, so you'll need to purchase separately. Choose a warm white (2700-3000K) for a traditional look that complements the browned brass finish, or opt for a dimmable GU10 if you're installing with dimmer control.

Yes, the Luminar is dimmable when paired with a compatible dimmable GU10 bulb and a trailing edge dimmer switch. Trailing edge dimmers are designed for LED bulbs and provide smoother, flicker-free dimming compared to older leading edge dimmers. Both the bulb and dimmer switch must support dimming — the fitting itself is dimmable-compatible but neither bulbs nor dimmer switches are included.

No, with an IP20 rating the Luminar is only suitable for dry indoor locations and is not certified for bathroom zones where moisture protection is required. For bathrooms you'll need a fitting rated IP44 or higher depending on the zone. The IP20 rating makes this ideal for living rooms, bedrooms, hallways or above artwork where you need directional accent lighting.

The Luminar measures 100mm high, 60mm wide, with a cylinder diameter of 50mm — making it quite compact and discreet on the wall. At 2kg it's a solid, substantial fitting in machined brass rather than a lightweight stamped product. The cylindrical form sits close to the wall and can be angled to direct light where needed, making it suitable even in tighter spaces or as bedside reading lights.

The Luminar comes with a 2-year manufacturer's warranty covering defects in materials and workmanship. The fitting is made by Rama and constructed from solid brass with precision Danish engineering, so it's built to last well beyond the warranty period. Note that the warranty covers the fitting itself — bulbs are consumables and aren't covered, nor is damage from incorrect installation.