Outdoor Lighting
Lyon PIR Sensor Outdoor Wall Light
Aluminium, Black — Welcomes you home before you arrive
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: OWL-BLK-0110

Security Meets Sophisticated
PIR Motion Sensor
Automatic on-off for security and efficiency
IP44 Rated
Weatherproof for outdoor use in rain
E27 Bulb Compatible
Up to 60W for customisable brightness

The fitting
- Material
- Metal and polycarbonate
- Width
- 120 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP44 · Outdoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Black
- Shape
- Rectangular
- Height
- 320 mm
- Depth
- 154 mm
Electrical
- Max wattage
- 60 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Wall · Surface
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Omnidirection Security Illumination
Casts a focused pool of light omnidirection when motion is detected, illuminating pathways, doorways and outdoor areas with clear, functional brightness. Ideal for security lighting around entrances, driveways and side passages where automatic activation is needed.
- Direction
- Omnidirectional
- Mounting height
- 1.8–2.4m
Works well in
- Porch / Entrance
- Patio
- Garden
- Driveway
- Pathway
- Outdoor
- Hotel
- Restaurant
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Mounting bracket
1× Pack of screws & plugs
1× Instruction manual
- Wall mount
- Surface
- Difficulty: easy
Questions
Does this PIR sensor wall light need to be installed by a qualified electrician?
Yes, as this is a mains-wired Class I outdoor wall light, installation must comply with Part P of the Building Regulations. Unless you're a competent person registered with a self-certification scheme, you'll need a qualified electrician to carry out the installation and certify the work. The light requires a proper earth connection and will typically mount to a standard BESA box or wall back plate.
What IP rating does this outdoor wall light have and is it suitable for exposed locations?
This wall light has an IP44 rating, which provides protection against solid objects over 1mm and water splashes from any direction. It's suitable for covered porches, under eaves, or areas with some shelter, but IP44 is not rated for fully exposed locations subject to driving rain or water jets. For best longevity, install it in a position with some overhead protection.
What type of bulb does the Lyon PIR wall light use and is it included?
This light requires an E27 ES (Edison Screw) bulb with a maximum wattage of 60W, which is not included. You can use standard E27 LED, halogen, or incandescent bulbs up to 60W, giving you flexibility to choose your preferred light output and colour temperature. For outdoor use, an LED bulb is recommended for energy efficiency and longer lifespan in varying temperatures.
Can I use a dimmable bulb with this PIR sensor wall light?
While you can physically fit a dimmable E27 bulb, dimming functionality is not practical with this fitting as it's controlled by a PIR motion sensor that switches the light on and off automatically. The sensor activates the light at full brightness when motion is detected, so dimming features would not be accessible during normal operation.
What are the dimensions of this outdoor wall light and how much clearance does it need?
The Lyon PIR wall light measures 120mm wide, 154mm deep (projection from wall), and 320mm tall. The 154mm depth means it extends about 15cm from the wall surface, so ensure you have adequate clearance from doorways, pathways, or windows. The compact height of 32cm makes it suitable for positioning beside entrance doors or garage areas without overwhelming the space.
How sensitive is the PIR sensor and can the detection range be adjusted?
While this product includes a PIR motion sensor for automatic activation, the specific detection range and adjustment capabilities aren't detailed in the manufacturer's specifications. Most PIR wall lights of this type offer detection ranges of 5-10 metres with some degree of sensitivity adjustment, but you should verify the exact specifications with the supplier before purchase if sensor customisation is critical for your installation location.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.


