Pendant Lights
Riva Cylindrical Cage Pendant Light
Metal, Light Grey — Industrial elegance for modern living spaces
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-CHR-0174

Lines That Shape Light
Open cage design
Creates striking light and shadow patterns
E27 ES bulb
Standard fitting, easy to replace yourself
12W max rating
Keep energy costs low with LED

The fitting
- Material
- Iron
- Width
- 100 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP20
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Grey
- Shape
- Cylindrical, Round
- Height
- 1500 mm
- Diameter
- 350 mm
Electrical
- Max wattage
- 12 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Ceiling · Surface
- Cable length
- 1.2 m
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Patterned Shadow and Glow
The vertical metal bars cast distinctive linear shadows whilst allowing light to radiate outward in all directions, creating a layered interplay of illumination and pattern. Ideal for adding sculptural interest above dining tables or kitchen islands where the cage structure becomes a decorative focal point.
- Direction
- Omnidirectional
- Mounting height
- 1.8–2.1m
Works well in
- Living Room
- Dining Room
- Bedroom
- Hallway
- Restaurant
- Bar / Café
- Hotel
- Kitchen
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Ceiling rose & mounting bracket
1× Set of screws & plugs
1× Instruction manual
- Ceiling mount
- Surface
- Difficulty: easy
Questions
Does the Riva pendant light require an electrician to install?
Yes, as a Class I hardwired pendant light, the Riva must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your mains supply via a ceiling rose or BESA box and requires proper earthing. DIY installation is not permitted for mains-voltage ceiling lights unless you are certified under the Competent Person Scheme.
What type of bulb does this pendant light take and is it included?
This fitting requires an E27 ES (Edison Screw) bulb with a maximum wattage of 12W. The bulb is not included, so you'll need to purchase one separately. We recommend an LED E27 bulb rated at 12W or lower for energy efficiency and compatibility with the fitting's specifications.
Can I use this pendant light with a dimmer switch?
Dimming capability depends entirely on the bulb you choose, as the fitting itself does not restrict dimming. If you fit a dimmable E27 LED bulb (clearly marked on packaging) and have a compatible LED dimmer switch installed, the light will dim. Standard non-dimmable bulbs will not work with dimmer switches and may flicker or fail.
Is the Riva cage pendant suitable for a bathroom?
No, this pendant light has an IP20 rating, which means it offers no protection against moisture and is only suitable for dry indoor locations. UK bathroom zones require minimum IP44 (Zone 2) or IP65 (Zones 0 and 1) ratings, so the Riva should only be used in living rooms, bedrooms, hallways, or dining areas.
What dimensions is the cylindrical cage and how low will it hang?
The exact dimensions are not listed in the specifications provided, but as a cylindrical cage pendant, the drop height will depend on the suspension length, which is often adjustable during installation. We recommend checking the product listing or contacting us for precise measurements including diameter, height, and total drop to ensure it suits your ceiling height and space.
How bright will this pendant be and what colour temperature should I choose?
Brightness depends on the E27 bulb you install—up to the 12W maximum. A 12W LED bulb typically produces around 1,000-1,200 lumens, suitable for ambient lighting in smaller rooms or as task lighting over a table. For colour temperature, choose 2700K for warm white (cosy, traditional), 3000K for soft white (neutral), or 4000K for cool white (crisp, modern) depending on your room's style and function.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.
