Akra Antique LED Wall Light — Antiqued Metal, 100cm
£500
Skip to product information
Click to zoom
Wall Lights
Akra Antique LED Wall Light
Antiqued Metal, 100cm — Linear elegance for minimalist hallways and stairwells
£500Includes VATKlarna.3 × £167 interest-free
Size
Secure checkout
Estimated delivery
14 – 20 August
Ordered in from our Turkish design house · Free UK delivery over £75
Key features−
Key Features
Slim 100cm minimalist design creates sophisticated vertical impact
Integrated LED with warm plexiglass diffusion for balanced ambience
Antiqued metal finish adds nostalgic character to modern spaces
Energy-efficient LED technology with no bulb replacement needed
Perfect for hallways, staircases, and contemporary feature walls
IP20 IndoorMetal & Plexiglass2 yr warranty30-day returns
Delivery & Returns
UK-stocked designs — dispatched within 1–2 working days by DPD or Royal Mail.
Made-to-order pieces — hand-finished by our European makers and delivered in 10–14 days. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
The design house
Turkey
A Turkish lighting workshop working in aged metal, soft glass and clean LED lines — every piece wired, tested and ready to install straight from the box.
Made in TurkeySKU: WAL-BRS-0429
01
Where Light Meets Line
Integrated LED
No bulbs to buy or replace
100cm Linear Design
Statement piece for hallways and staircases
Antiqued Metal Finish
Nostalgic charm meets modern minimalist form
02
The fitting
- Material
- Metal & Plexiglass
- Width
- 23 mm
- Lampholder
- Integrated LED
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Made in
- Turkey
- Warranty
- 2 years
Full specification
Physical
- Finish
- Antiqued
- Shape
- Linear
- Height
- 1010 mm
Electrical
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Light output
Installation
- Mounting
- Wall · Surface
- Suitable surfaces
- Plasterboard, brick, masonry wall
- Difficulty
- Moderate
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
03
Soft Linear Wall Wash
This metre-long linear fixture casts gentle LED light through its plexiglass surface, creating a warm ambient glow along the wall. Perfect for hallways, staircases, or as subtle feature lighting in living spaces where you want a balance of decoration and functional illumination.
- Direction
- Omnidirectional diffused
- Mounting height
- 1.4–1.8m
Works well in
- Living Room
- Bedroom
- Hallway
- Stairway
- Restaurant
- Hotel
- Gallery / Museum
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
04
Where it comes from
The design house
Turkey
A Turkish lighting workshop working in aged metal, soft glass and clean LED lines — every piece wired, tested and ready to install straight from the box.
Made in Turkey
05
What's involved
Electrician requiredHardwired. Installation difficulty: moderate.
Fixes to plasterboard, brick, masonry wallScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× Akra Antique LED wall light
1× Pack of mounting screws and plugs
1× Installation instructions
1× Pack of mounting screws and plugs
1× Installation instructions
- Wall mount
- Surface
- Difficulty: moderate
06
Questions
Does the Akra Antique LED wall light need to be installed by an electrician?
Yes, this is a hardwired Class I fitting that must be installed by a qualified electrician in accordance with UK Part P Building Regulations. The light connects directly to your mains wiring and requires an earth connection, so it's not a plug-in fixture. Your electrician will secure it to a suitable wall surface and make the necessary electrical connections safely.
Can I replace the LED bulbs in this wall light when they stop working?
No, the Akra uses integrated LEDs, which means the light source is built into the fitting and cannot be replaced separately. Integrated LEDs typically last 15,000–25,000 hours, so with average use you can expect many years of service. If the LEDs eventually fail after this period, the entire fitting would need replacing, though this is covered by the 2-year manufacturer's warranty.
Is this 100cm LED wall light dimmable?
The product specifications do not indicate dimming capability, so you should assume the Akra is not dimmable. If dimming is essential for your installation, we recommend contacting us before purchase to confirm compatibility with trailing edge or leading edge dimmer switches, as retrofitting dimming to a non-dimmable integrated LED fitting is generally not possible.
What are the exact dimensions and how much does it protrude from the wall?
The Akra measures 1010mm in height and just 23mm in width, making it an exceptionally slender vertical strip. The depth (protrusion from the wall) is not specified in the technical data, but linear surface-mounted LED fittings of this type typically extend 15–30mm from the wall surface. This slim profile makes it ideal for narrow hallways, alongside mirrors, or flanking doorways without encroaching into walkways.
Can this wall light be used in a bathroom?
No, the Akra has an IP20 rating, which means it offers no moisture protection and is suitable for dry indoor locations only. For bathroom use, you would need a fitting rated at least IP44 (or IP65 for zones 1 and 2 near the shower or bath). This wall light is best suited to hallways, staircases, bedrooms, and living areas where moisture is not a concern.
What colour temperature does the integrated LED produce and how bright is it?
The specifications provided do not list the lumen output or colour temperature (CCT) for this fitting. Integrated LED wall lights of this style typically emit warm white light around 3000K, but you should contact us to confirm the exact brightness and tone before purchase if this is critical for your project. The plexiglass diffuser is designed to cast soft, diffused light rather than focused task lighting.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
From Europe’s quiet workshops
Copenhagen brass, Milanese plaster, hand-woven French rattan — small independent design houses, named by place, plainly.
Designed in Europe. Named honestly.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.