Wall Lights
Leiron Round Wall Light
Paintable White Plaster, Up & Down — Soft sculpture with upward grace
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-WHT-0327

A Canvas for Light
Paintable Plaster
Blend seamlessly or paint any colour
Up & Down Light
Double emission for dramatic wall effects
Fully Dimmable
Set the mood, any time

The fitting
- Material
- Plaster
- Width
- 155 mm
- Projection
- 70 mm
- Lampholder
- G9 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
Full specification
Physical
- Finish
- Paintable White
- Height
- 155 mm
- Diameter
- 155 mm
- Depth
- 70 mm
- Weight
- 0.6 kg
Electrical
- Max wattage
- 25 W per lamp
- Wattage
- 25 W
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge
- Voltage
- 220-240V
- Electrical class
- Class II
Installation
- Mounting
- Wall
- Suitable surfaces
- Plasterboard, brick, masonry wall
- Difficulty
- Moderate
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Cover
- Returns
- 30 days
- Pack quantity
- 1

Up & Down Wall Wash
Creates two beams of light that wash upwards and downwards along the wall, producing a dramatic vertical accent with soft ambient illumination. The circular plaster disc appears to glow from above and below, highlighting architectural features and adding depth to hallways, living rooms or bedrooms.
- Direction
- Up + Down
- Mounting height
- 1.5–1.8m
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Stairway
- Hotel
- Restaurant
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
1× Installation instructions
- Wall mount
- Difficulty: moderate
Questions
Does the Leiron wall light need to be installed by a qualified electrician?
Yes, as this is a hardwired mains-voltage wall light, installation must comply with UK Building Regulations Part P. Unless you are a competent person registered with an electrical self-certification scheme, you'll need to hire a qualified electrician to carry out the installation and notify Building Control if required. The fitting is Class II (double-insulated), so it does not require an earth connection.
What type of bulb does this wall light use and is it included?
This fitting requires a single G9 capsule bulb with a maximum wattage of 25W, which is not included with the light. G9 bulbs are widely available in both LED and halogen versions—we recommend an LED G9 for energy efficiency and longer lifespan. Make sure the bulb you choose is dimmable if you intend to use it with a dimmer switch.
Can the Leiron round wall light be used with a dimmer switch?
Yes, the fitting itself is dimmable, but you must use a dimmable G9 bulb and ensure your dimmer switch is compatible with the bulb type you choose. LED G9 bulbs typically require an LED-compatible trailing edge dimmer, whereas halogen G9 bulbs work with standard dimmers. Always check the bulb manufacturer's specifications for dimmer compatibility.
What are the dimensions and how far does it project from the wall?
The Leiron has a diameter of 155mm (approximately 15.5cm) and projects 70mm from the wall. This relatively low profile makes it suitable for hallways, landings, and living spaces where you want ambient up-and-down lighting without the fitting protruding too far into the room.
Can I use this wall light in a bathroom?
No, this wall light is rated IP20, which means it offers no protection against moisture and is only suitable for dry indoor locations. For bathroom use, you would need a fitting rated at least IP44 (or IP65 for zones 1 and 2), so the Leiron should be installed in living rooms, bedrooms, hallways, or other moisture-free areas only.
Can I paint the plaster finish to match my walls?
Yes, the Leiron is supplied in a paintable white plaster finish specifically designed to be overpainted. This allows you to match it perfectly to your wall colour or décor. Use a standard emulsion paint and apply thin, even coats once the fitting is installed, taking care to mask off any internal components or the lampholders before painting.
Complete the Look
Products that pair well with this light

WALL LIGHTS
Santorini Corner Wall Light — Paintable White Plaster, Uplight

WALL LIGHTS
Livigno Wall Light — Paintable White Plaster, Uplight

CEILING LIGHTS
Genesis Aluminium Ceiling Spotlight — White, Adjustable
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.






