Katsura
layered stone-effect pendant light
Layered elegance for modern dining spaces
- 40 cm — bedside or narrow island
- Soft rings of light between the layers
- Mood light rather than task light
Size40 cm
- 40 cm£110
- 60 cm£175
- E27 bulb, sold separately
- Hardwired
- Dimmable
Estimated arrival 2 Nov to 4 Nov
5 to 7 working days · Tracked delivery Delivery detailsguarantee
on unused lights
01 / The feeling
Sculptural Simplicity, Softly Stacked
Sculptural and serene, this layered pendant casts beautiful ambient light through its stacked, curved planes. The matt white stone-effect finish brings organic texture and contemporary elegance to smaller spaces — perfect suspended low over a bedside table, creating intimacy in a narrow hallway, or hung as a pair above a compact kitchen island. Its architectural form becomes a focal point even when unlit.
The Katsura measures 40 cm long by 27 cm wide, with adjustable suspension up to 2 metres to suit your ceiling height. Crafted from durable moulded resin composite, it takes one E27 bulb (max 7W LED, not included) and is fully dimmable when paired with a dimmable bulb and trailing edge dimmer switch. Rated IP20 for indoor use, it installs easily on standard ceiling surfaces. Class I earthed fitting for safety and peace of mind.
- Sculptural stone effectLayered resin curves mimic natural stone
- Fully dimmableSet the mood with dimmable bulbs
- Compact 40cm widthPerfect for bedsides or narrow islands
- 7W
- Max per lamp
- E27
- Lampholder
02 / Find its place
A small footprint.
A lasting impression.
Enough presence to anchor a table, small enough to live under.
Rated IP20 — dry indoor spaces only, so not for bathrooms or outdoors.
03 / The finer details
Quiet form.
Beautifully finished.
White in resin (stone effect). Hardwired, so a qualified electrician fits it — the mounting hardware is in the box.
- Width
- 40 cm
- Drop
- 27 cm
- Material
- Resin (stone effect)
- Light source
- E27
- Voltage
- 220-240V
- Electrical class
- Class I
- IP rating
- IP20
- Guarantee
- 2 years
Full specification
Construction
- Material
- Resin (stone effect)
- Finish
- White
- Shape
- Round
- Width
- 400 mm
- Drop
- 270 mm
- Cable length
- 2.0 m
- Pack quantity
- 1
Light
- Light source
- E27
- Bulb included
- No — sold separately
- Max bulb wattage
- 7 W per lamp
- Direction
- Omnidirectional
- Dimmable
- Yes · Trailing edge (with dimmable bulb)
Fitting it
- Mount
- Suspended
- Surface / recessed
- Surface
- Wiring
- Hardwired
- Electrician
- Required
- Difficulty
- Easy
- Suits
- Plasterboard, timber joist, concrete ceiling
- Mounting height
- 1.8–2.1m
Electrical & safety
- Voltage
- 220-240V
- Electrical class
- Class I
- IP rating
- IP20 · Indoor
Cover & compliance
- Made in
- China
- Guarantee
- 2 years
- Returns
- 30 days, unused
- CE marked
- Yes
- RoHS
- Compliant
A one-page summary you can print or send to your electrician.
What arrives in the box
1× Pendant light fitting
1× Pack of mounting screws and plugs
1× Instruction manual
Good to know
A few questions,
before it comes home.
Does the Katsura pendant light require an electrician to install?
Yes, this is a hardwired ceiling pendant and installation must comply with Part P of the Building Regulations in England and Wales. Unless you're a qualified electrician or competent person, you'll need to hire a registered sparky to connect it safely to your mains circuit. The fitting itself is straightforward to mount to a standard ceiling rose or BESA box, but the electrical connection is notifiable work.
What type of bulb does this pendant take and is one included?
The Katsura uses a standard E27 screw bulb (Edison screw), which is not included in the box. You'll need to purchase an LED bulb separately with a maximum wattage of 7W. For best results with the layered stone-effect shade, we'd recommend a warm white (2700K-3000K) LED in either standard or globe shape.
Can this pendant light be dimmed?
Yes, the fitting is dimmable when paired with a dimmable E27 LED bulb and a trailing edge dimmer switch. You'll need to ensure both the bulb you purchase is marked as dimmable and that your dimmer is compatible with LED loads—older leading edge dimmers designed for incandescent bulbs may cause flickering. The pendant itself has no restrictions on dimming once these requirements are met.
What are the exact dimensions and how low will it hang?
The shade measures 40 cm wide and 27 cm deep (tall), with a 2-metre cable supplied. This gives you flexibility to suspend it at various heights depending on your ceiling and desired effect—ideal for hanging low over a bedside table or dining nook. The cable can be shortened during installation if you prefer a higher mounting position.
Is this pendant suitable for a bathroom?
No, the Katsura has an IP20 rating, which means it's only suitable for dry indoor locations and offers no protection against moisture. For bathroom use, you'd need a minimum of IP44 (ideally IP65 in shower zones), so this pendant is best kept to bedrooms, living rooms, hallways, or dining areas.
What's the warranty coverage on this pendant light?
This fitting comes with a 2-year manufacturer warranty covering defects in materials and workmanship. The warranty applies to the pendant fixture itself, though bulbs are typically considered consumables and aren't covered. Keep your proof of purchase and register the product if prompted to ensure you're covered for the full term.
Still deciding? Ask us about KatsuraMonday to Friday, 9am to 5pm
Complete the look
PENDANT LIGHTS
Shiro Round Disc Pendant Light — White Stone Effect, 60 cm
CEILING LIGHTS
Zola Terrazzo-Effect Ceiling Light — White & Rose Gold
WALL LIGHTS
Santorini Corner Wall Light — Paintable White Plaster, Uplight
TABLE LAMPS