Pendant Lights
Katsura Layered Stone-Effect Pendant Light
White, 40 cm — Layered elegance for modern dining spaces
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-WHT-0508
Sculptural Simplicity, Softly Stacked
Sculptural stone effect
Layered resin curves mimic natural stone
Fully dimmable
Set the mood with dimmable bulbs
Compact 40cm width
Perfect for bedsides or narrow islands
The fitting
- Material
- Resin (stone effect)
- Width
- 400 mm
- Lampholder
- E27 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- White
- Shape
- Round
- Depth
- 270 mm
Electrical
- Max wattage
- 7 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge (with dimmable bulb)
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Suspended · Surface
- Suitable surfaces
- Plasterboard, timber joist, concrete ceiling
- Cable length
- 2.0 m
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
Soft Omnidirectional Glow
The stacked stone-effect layers allow light to escape between the curved planes, casting gentle radial illumination in all directions. Creates an intimate, ambient mood ideal for bedside use, hallways, or paired over narrow kitchen islands where decorative presence matters more than task lighting.
- Direction
- Omnidirectional
- Mounting height
- 1.8–2.1m
Works well in
- Living Room
- Dining Room
- Bedroom
- Hallway
- Restaurant
- Hotel
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
1× Instruction manual
- Suspended mount
- Surface
- Difficulty: easy
Questions
Does the Katsura pendant light require an electrician to install?
Yes, this is a hardwired ceiling pendant and installation must comply with Part P of the Building Regulations in England and Wales. Unless you're a qualified electrician or competent person, you'll need to hire a registered sparky to connect it safely to your mains circuit. The fitting itself is straightforward to mount to a standard ceiling rose or BESA box, but the electrical connection is notifiable work.
What type of bulb does this pendant take and is one included?
The Katsura uses a standard E27 screw bulb (Edison screw), which is not included in the box. You'll need to purchase an LED bulb separately with a maximum wattage of 7W. For best results with the layered stone-effect shade, we'd recommend a warm white (2700K-3000K) LED in either standard or globe shape.
Can this pendant light be dimmed?
Yes, the fitting is dimmable when paired with a dimmable E27 LED bulb and a trailing edge dimmer switch. You'll need to ensure both the bulb you purchase is marked as dimmable and that your dimmer is compatible with LED loads—older leading edge dimmers designed for incandescent bulbs may cause flickering. The pendant itself has no restrictions on dimming once these requirements are met.
What are the exact dimensions and how low will it hang?
The shade measures 40 cm wide and 27 cm deep (tall), with a 2-metre cable supplied. This gives you flexibility to suspend it at various heights depending on your ceiling and desired effect—ideal for hanging low over a bedside table or dining nook. The cable can be shortened during installation if you prefer a higher mounting position.
Is this pendant suitable for a bathroom?
No, the Katsura has an IP20 rating, which means it's only suitable for dry indoor locations and offers no protection against moisture. For bathroom use, you'd need a minimum of IP44 (ideally IP65 in shower zones), so this pendant is best kept to bedrooms, living rooms, hallways, or dining areas.
What's the warranty coverage on this pendant light?
This fitting comes with a 2-year manufacturer warranty covering defects in materials and workmanship. The warranty applies to the pendant fixture itself, though bulbs are typically considered consumables and aren't covered. Keep your proof of purchase and register the product if prompted to ensure you're covered for the full term.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.





