Pendant Lights
Kintsu Wide Stone-Effect Pendant Light
White — Sculptural stone softness overhead
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-WHT-0503
Calm in Horizontal Form
600mm Wide Profile
Perfect horizontal statement above islands and tables
Fully Dimmable
Set the mood with dimmable bulb
2 Metre Cable
Adjustable drop for high or low ceilings
The fitting
- Material
- Resin (stone effect)
- Width
- 600 mm
- Lampholder
- E27 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- White
- Shape
- Round
- Depth
- 250 mm
Electrical
- Max wattage
- 7 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge (with dimmable bulb)
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Suspended · Surface
- Suitable surfaces
- Plasterboard, timber joist, concrete ceiling
- Cable length
- 2.0 m
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
Downward Ambient Pool
The single E27 bulb casts a soft pool of light directly downward, ideal for illuminating dining tables or kitchen islands without glare. The wide stone shade diffuses the beam gently at the edges while keeping focus below.
- Direction
- Downlight
- Mounting height
- 0.7–0.9m above surface
Works well in
- Living Room
- Dining Room
- Bedroom
- Hallway
- Restaurant
- Hotel
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Ceiling rose cover
1× Pack of mounting screws and plugs
1× Installation instructions
- Suspended mount
- Surface
- Difficulty: easy
Questions
Does the Kintsu wide pendant light require an electrician to install?
Yes, this pendant is hardwired to the mains and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your ceiling wiring (typically via a BESA box or ceiling rose) and cannot simply be plugged in. While the installation itself is straightforward for a professional, legal compliance and safety require a certified electrician to carry out and certify the work.
What bulb do I need for the Kintsu stone-effect pendant?
You'll need one E27 (Edison screw) bulb with a maximum wattage of 7W. No bulb is included, so you'll need to purchase this separately. We'd recommend an LED E27 bulb in your preferred colour temperature—warm white (2700K) for cosy dining spaces or cool white (4000K) for task-focused kitchen islands—keeping within the 7W limit to ensure safe operation.
Can this pendant light be dimmed?
Yes, the Kintsu is dimmable when fitted with a compatible dimmable E27 bulb and a trailing edge dimmer switch. You'll need to ensure both the bulb you purchase is marked as dimmable and that your dimmer is a trailing edge type (not leading edge), as this works best with modern LED lamps. If you experience flickering, check that both components are compatible with each other.
What are the dimensions of this pendant and how low does it hang?
The pendant shade measures 600mm wide and 250mm deep, giving it a low, horizontal profile ideal for dining tables or kitchen islands. The cable length is 2 metres, which provides flexibility for ceiling heights, though this can typically be shortened during installation by an electrician to suit your space. The wide, shallow form means it won't dominate visually but still creates a strong anchoring presence over a surface.
Can I use this pendant light in a bathroom?
No, this pendant has an IP20 rating, which means it's only suitable for dry indoor environments and offers no protection against moisture. Bathrooms require a minimum of IP44 (or IP65 for directly above baths/showers), so the Kintsu is not appropriate for bathroom zones. It's best suited to living rooms, dining areas, bedrooms, or kitchens away from direct water exposure.
What warranty does the white stone-effect pendant come with?
This fitting is covered by a 2-year manufacturer's warranty from the date of purchase. The warranty covers manufacturing defects and faults under normal domestic use, but does not cover damage from improper installation, accidental damage, or wear and tear on consumable parts like bulbs. Keep your proof of purchase to make any warranty claims.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.





