Wall Lights
Nancy Orb Bathroom Wall Light
Black, Frosted Glass — Sculptural elegance for steamy sanctuaries
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-BLK-0276
Sculptural Elegance Meets Steam
IP44 Rated
Safe for bathroom zone 2 use
Fully Dimmable
Adjust ambience to suit your mood
2 Year Warranty
Quality assured and built to last
The fitting
- Material
- Metal / Frosted Glass
- Width
- 156 mm
- Lampholder
- E14 SES × 1
- IP rating
- IP44 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Matt Black
- Shape
- Spherical
- Height
- 403 mm
- Depth
- 190 mm
Electrical
- Max wattage
- 40 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Wall · Surface
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · RoHS
- Bathroom zone
- Zone 2
Cover
- Returns
- 30 days
- Pack quantity
- 1
Soft Diffused Orb Glow
The frosted glass sphere diffuses light evenly in all directions, creating a gentle ambient glow that softens shadows without glare. Perfect for providing flattering, relaxed illumination in bathrooms where a warm, welcoming atmosphere is needed.
- Direction
- Omnidirectional
- Mounting height
- 1.5–1.8m
Works well in
- Bathroom
- Bedroom
- Hallway
- Porch / Entrance
- Hotel
- Spa / Salon
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
- Wall mount
- Surface
- Difficulty: easy
Questions
Is the Nancy wall light suitable for bathroom use and what zones is it rated for?
Yes, the Nancy is IP44-rated and approved for bathroom Zone 2, making it suitable for areas outside the immediate shower or bath enclosure. This means you can safely install it above a basin, as a general wall light, or in adjacent areas where it may be exposed to occasional moisture. It must not be installed in Zone 0 or Zone 1 (inside or directly above the bath or shower).
What type of bulb does this wall light require and is one included?
This fitting takes one E14 SES (Small Edison Screw) bulb, and no bulb is included with purchase. The E14 socket is suitable for standard candle or golf ball LED bulbs. Since the Nancy features frosted glass, you have flexibility in choosing bulb appearance—both clear and frosted E14 bulbs will work beautifully.
Can the Nancy Orb wall light be dimmed?
Yes, the fitting itself is dimmable, but you'll need to use a dimmable E14 LED bulb and have a compatible dimmer switch installed on your lighting circuit. If your existing wall switch is a standard on/off switch, you'll need an electrician to replace it with a trailing-edge LED-compatible dimmer for smooth, flicker-free dimming.
Do I need an electrician to install this hardwired wall light?
Yes, as this is a hardwired Class I fitting, installation must comply with UK Building Regulations Part P, which typically requires a qualified electrician unless you are competent and able to self-certify the work. The fitting connects directly to your mains electrical supply, usually via a BESA box or standard wall back plate, and must be properly earthed.
What are the dimensions of the Nancy and how far does it protrude from the wall?
The Nancy measures 403mm in height, 156mm in width, and projects 190mm from the wall. This substantial depth gives the spherical glass orb room to breathe within its black frame, creating a sculptural silhouette. EnsoLight recommends mounting it at 1.5–1.8m from the floor for optimal visual impact and practical use.
What warranty is provided with this wall light?
The Nancy Orb wall light comes with a 2-year manufacturer's warranty covering defects in materials and workmanship. This warranty applies from the date of purchase and is subject to normal domestic use and proper installation by a qualified electrician. The warranty does not cover bulbs, which are consumable items.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.


