Tsumi

You'll need three E27 screw-in bulbs, sold separately. Each bulb must not exceed 12W, which makes this fitting ideal for LED bulbs. For a warm, inviting glow that complements the natural travertine and wood, we'd recommend 2700K-3000K colour temperature bulbs in an E27 fitting.

Yes, the fitting is dimmable when used with dimmable E27 bulbs and a trailing edge dimmer switch. You'll need to ensure both your bulbs and dimmer are compatible—most quality LED bulbs marked as 'dimmable' will work well with a trailing edge dimmer. The pendant itself supports dimming, but standard non-dimmable bulbs will not dim even with a dimmer installed.

Yes, an electrician is required. This is a hardwired Class I fitting that must be connected to your mains electrical supply and properly earthed, which falls under Part P of the Building Regulations in England and Wales. The installation itself is straightforward for a qualified electrician, suitable for plasterboard, timber joist, or concrete ceilings.

The Tsumi measures 650mm wide, 170mm deep, and has a total drop of 1300mm from ceiling to base. The cable length is height-adjustable, so you can shorten it to suit your ceiling height and desired hanging position above a dining table or kitchen island. The 650mm linear width makes it ideal for tables or islands between 1200-1800mm long.

No, the Tsumi has an IP20 rating, which means it's not protected against moisture and must only be used in dry indoor locations. IP20-rated fittings are not permitted in bathroom zones where water splashes or steam are present. It's best suited to dining rooms, kitchens, hallways, or bedrooms.

The Tsumi comes with a 2-year manufacturer's warranty covering defects in materials and workmanship. The warranty is valid from the date of purchase and covers the fitting itself, though bulbs are considered consumable items and are not covered. The pendant is CE marked and RoHS compliant, meeting all UK safety standards.