Solara

Yes, this is a mains-wired wall light and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting will typically mount to a standard BESA box or backplate on a finished wall surface. Always ensure the mains supply is isolated before beginning any electrical work.

The Solara uses a standard screw-in bulb fitting (usually E27 or E14 depending on the lamp holder size—check the product specification for confirmation). You can use LED, halogen, or incandescent bulbs up to the maximum wattage stated on the fitting label. For alabaster shades, warm white LEDs (2700K–3000K) typically provide the most flattering glow through the natural stone.

Dimming capability depends on the bulb you install, not the fitting itself. If you have a compatible dimmer switch installed, simply use a dimmable LED or halogen bulb. Ensure your dimmer is rated for LED loads if using LED bulbs, as older dimmer switches designed for incandescent lamps may cause flickering or poor performance.

Alabaster is a natural stone and, while durable for everyday use, can chip or crack if struck. Handle with care during installation and cleaning. Replacement shades are sometimes available from the manufacturer, but alabaster pieces are often unique due to natural veining, so an exact match may not be possible.

This fitting does not have an IP rating suitable for bathroom use unless specified otherwise in the product details. UK bathrooms require specific IP ratings depending on the zone (e.g., IP44 or higher for zones 1 and 2). Check the technical specification—if no IP rating is listed, the Solara is intended for dry indoor locations only.

The combination of alabaster and satin brass makes this sconce ideal for hallways, living rooms, bedrooms, or dining areas where you want soft, ambient lighting with a touch of elegance. The alabaster diffuses light gently, creating a warm glow rather than focused task lighting, so it's perfect for mood and accent lighting rather than workspaces.