Aya

The Aya uses a standard E27 screw bulb with a maximum wattage of 12W. The bulb is not included, so you'll need to purchase one separately. We'd recommend an LED E27 bulb for energy efficiency — just ensure it doesn't exceed the 12W limit and choose a dimmable version if you want dimming functionality.

As this is a hardwired ceiling fitting, you'll need a qualified electrician to install it in compliance with UK Building Regulations Part P. The installation difficulty is rated as moderate and requires connection to your mains supply, typically using an existing ceiling rose or BESA box. It's suitable for mounting on plasterboard, timber joists, or concrete ceilings.

Yes, the Aya is dimmable when paired with a dimmable E27 bulb and a trailing edge dimmer switch. You'll need both components — the fitting itself supports dimming, but you must use a bulb marked as dimmable and have a compatible trailing edge dimmer installed on the circuit. Standard non-dimmable bulbs may flicker or fail if used with a dimmer.

The Aya measures 38 cm (375 mm) in diameter and 23 cm in height. This makes it ideal for medium-sized rooms such as bedrooms, dining areas, or smaller living rooms. With its single 12W lampholder, it works best as ambient lighting or in spaces where you're supplementing with other light sources rather than as the sole light in very large rooms.

No, the Aya has an IP20 rating, which means it's not protected against moisture and is only suitable for dry indoor locations. It cannot be used in bathrooms or any other areas where it may be exposed to water or high humidity. For bathroom lighting, you'd need a fitting with a minimum rating of IP44 or IP65 depending on the zone.

This fitting comes with a 2-year manufacturer's warranty covering defects in materials and workmanship. The light is CE marked and RoHS compliant, meeting UK safety and environmental standards. Note that the warranty covers the fitting itself — bulbs are considered consumables and are not covered.