Kiro Ceramic Wall Light — Shell White, Large
£253
Skip to product information
Materials
Ceramic
IP20 Indoor
2 yr warranty
Moderate install
Click to zoom
Wall Lights
Kiro Ceramic Wall Light
Shell White, Large — Sculptural curves for softly lit walls
£253Includes VATKlarna.3 × £84 interest-free
Size
Colour
Secure checkout
Made to order
Estimated delivery 21 September – 12 October
Ordered in from our European design house · Free UK delivery over £75
Key features−
Key Features
Handmade ceramic wall light, cast and glazed by Patrícia Lobo in Portugal
Cone shade washes light up and down the wall — soft, warm and glare-free
Shell White glaze — a soft off-white with a warm, chalky cast, with hand-finished variation in every piece
Large: 235 x 135 x 200mm (w x d x h), 900g
Takes 1 x G9 bulb up to 40W (not included) — dimmable with a compatible dimmer
IP20 IndoorCeramic2 yr warranty30-day returns
Delivery & Returns
UK-stocked designs — dispatched within 1–2 working days by DPD or Royal Mail.
Made-to-order pieces — hand-finished by our European makers and delivered in 10–14 days. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-WHT-0419
01
The fitting
- Material
- Ceramic
- Width
- 235 mm
- Lampholder
- G9 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- White
- Height
- 200 mm
- Depth
- 135 mm
- Weight
- 0.9 kg
Electrical
- Max wattage
- 40 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Cover
- Returns
- 30 days
- Pack quantity
- 1
02
What's involved
Electrician requiredHardwired. Installation difficulty: moderate.
Wall fixingsScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× Kiro ceramic wall light fitting
1× Pack of mounting screws and plugs
1× Installation instructions
1× Pack of mounting screws and plugs
1× Installation instructions
- Wall mount
- Surface
- Difficulty: moderate
03
Up & Down Wall Wash
The cone-shaped ceramic shade directs soft, glare-free light both upwards and downwards, creating gentle washes of illumination that highlight the wall's texture above and below. Perfect for hallways, bedrooms, and living spaces where ambient mood lighting is desired.
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Restaurant
- Hotel
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
04
Where it comes from
05
Questions
Does the Kiro ceramic wall light need to be installed by an electrician?
Yes. The Kiro is hardwired into the mains and must be installed by a qualified electrician in compliance with Part P of the Building Regulations. It typically mounts onto a standard BESA box or wall back box with a permanent mains connection. This isn't a plug-in fitting, so DIY installation isn't permitted unless you're qualified and can certify the work yourself.
What type of bulb does the Kiro large wall light take?
The Kiro uses a single G9 bulb (capsule type). G9 bulbs are widely available in both halogen and LED versions — we'd recommend a warm white LED G9 for energy efficiency and longevity. The fitting is dimmable, so if you want dimming functionality, make sure to choose a dimmable G9 bulb and pair it with a compatible dimmer switch.
Can I use this wall light in a bathroom?
No. The Kiro has an IP20 rating, which means it's suitable for dry interior locations only and offers no protection against moisture. For bathrooms, you'd need a fitting rated at least IP44 (IP65 for shower zones). This light is ideal for hallways, living rooms, bedrooms, and dining areas instead.
Is the Kiro ceramic wall light dimmable?
Yes, the fitting itself is dimmable, but you'll need two things: a dimmable G9 LED bulb and a compatible trailing-edge dimmer switch installed on your lighting circuit. Not all G9 LEDs dim smoothly, so check the bulb packaging for dimming compatibility. If you're using an old dimmer designed for halogens, it may need upgrading to work properly with LED bulbs.
What are the exact dimensions of the large Kiro wall light?
The large version measures 235mm wide, 200mm high, and projects 135mm from the wall. It weighs 900g, so it's substantial enough to feel quality-made but light enough to mount on plasterboard with appropriate fixings. Bear in mind the 135mm projection when positioning it — you'll want adequate clearance in hallways or beside doorways.
Does the Kiro wall light come with a bulb included?
No, the G9 bulb is not included and must be purchased separately. This allows you to choose your preferred colour temperature (warm white, cool white, etc.) and whether you want a dimmable LED or halogen version. A single lampholder means you'll need just one bulb to get it working.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
From Europe’s quiet workshops
Copenhagen brass, Milanese plaster, hand-woven French rattan — small independent design houses, named by place, plainly.
Designed in Europe. Named honestly.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.