Kiro
ceramic wall light
Sculptural curves for softly lit walls
- Chalky ceramic, warmer than plaster
- Lights the wall up and down, no glare
- 23.5 cm wide — sized for a bigger hall
FinishShell White
SizeLarge
- Small£300
- Large£350
- G9 bulb, sold separately
- Hardwired
- Dimmable
Estimated arrival 22 Sep to 24 Sep
5 to 7 working days · Tracked delivery Delivery detailsguarantee
on unused lights

01 / The feeling
Lovely by day.
A little magic after dark.
Hand-cast in a small Portuguese studio, the Kiro is a wall light that behaves more like a piece of ceramics than a fitting. Its cone-shaped shade throws light both up and down, washing the wall above and below in a soft, glare-free glow rather than pointing a beam into the room. In Shell White — a soft off-white with a warm, chalky cast — it reads as quiet architecture by day and turns into a warm band of light after dark.
Patrícia Lobo casts, paints and glazes every Kiro by hand at LOBO Atelier, so slight variations in tone and surface are part of the piece and no two are quite the same. The Large measures 235mm wide x 135mm deep x 200mm high and takes one G9 bulb up to 40W (a 4W LED is ideal, bulb not included), dimmable with a dimmable bulb and compatible dimmer. Hardwired for indoor wall mounting. Made to order in Portugal.
Key details: Number of lights: 1 light · Colour family: White · Finish: Shell White glazed ceramic · Design: Contemporary / Modern minimalist · Width: 235mm
- Handmade CeramicHand-cast in Portugal by LOBO Atelier
- Fully DimmableAdjust the ambience to suit any mood
- Dual Light WashCasts soft glow upwards and downwards
- 40W
- Max per lamp
- G9
- Lampholder
- 20 cm
- Tall

02 / Find its place
A small footprint.
A lasting impression.
Just 24 cm wide, with a 20 cm vertical line. Add a gentle glow beside the bed or bring warmth to a hallway.
Try the size before you buy
Mark a 20 cm line on your wall with removable tape. Allow 14 cm of depth and check the position from where you sit or lie.
Rated IP20 — dry indoor spaces only, so not for bathrooms or outdoors.

03 / The finer details
Quiet form.
Beautifully finished.
Shell White in ceramic. Hardwired, so a qualified electrician fits it — the mounting hardware is in the box.
- Height
- 20 cm
- Width
- 24 cm
- Projection
- 14 cm
- Weight
- 0.9 kg
- Material
- Ceramic
- Light source
- G9
- Voltage
- 220-240V
- Electrical class
- Class I
- IP rating
- IP20
- Guarantee
- 2 years
Full specification
Construction
- Material
- Ceramic
- Finish
- White
- Shape
- Conical
- Height
- 200 mm
- Width
- 235 mm
- Projection
- 135 mm
- Weight
- 0.9 kg
- Pack quantity
- 1
Light
- Light source
- G9
- Max bulb wattage
- 40 W per lamp
- Dimmable
- Yes
Fitting it
- Mount
- Wall
- Surface / recessed
- Surface
- Wiring
- Hardwired
- Electrician
- Required
- Difficulty
- Moderate
- Suits
- Plasterboard, brick, masonry wall
Electrical & safety
- Voltage
- 220-240V
- Electrical class
- Class I
- IP rating
- IP20 · Indoor
Cover & compliance
- Made by
- LOBO Atelier
- Made in
- Portugal
- Guarantee
- 2 years
- Returns
- 30 days, unused
- CE marked
- Yes
- RoHS
- Compliant
A one-page summary you can print or send to your electrician.
What arrives in the box
1× Kiro ceramic wall light fitting
1× Pack of mounting screws and plugs
1× Installation instructions

Good to know
A few questions,
before it comes home.
Does the Kiro ceramic wall light need to be installed by an electrician?
Yes. The Kiro is hardwired into the mains and must be installed by a qualified electrician in compliance with Part P of the Building Regulations. It typically mounts onto a standard BESA box or wall back box with a permanent mains connection. This isn't a plug-in fitting, so DIY installation isn't permitted unless you're qualified and can certify the work yourself.
What type of bulb does the Kiro large wall light take?
The Kiro uses a single G9 bulb (capsule type). G9 bulbs are widely available in both halogen and LED versions — we'd recommend a warm white LED G9 for energy efficiency and longevity. The fitting is dimmable, so if you want dimming functionality, make sure to choose a dimmable G9 bulb and pair it with a compatible dimmer switch.
Can I use this wall light in a bathroom?
No. The Kiro has an IP20 rating, which means it's suitable for dry interior locations only and offers no protection against moisture. For bathrooms, you'd need a fitting rated at least IP44 (IP65 for shower zones). This light is ideal for hallways, living rooms, bedrooms, and dining areas instead.
Is the Kiro ceramic wall light dimmable?
Yes, the fitting itself is dimmable, but you'll need two things: a dimmable G9 LED bulb and a compatible trailing-edge dimmer switch installed on your lighting circuit. Not all G9 LEDs dim smoothly, so check the bulb packaging for dimming compatibility. If you're using an old dimmer designed for halogens, it may need upgrading to work properly with LED bulbs.
What are the exact dimensions of the large Kiro wall light?
The large version measures 235mm wide, 200mm high, and projects 135mm from the wall. It weighs 900g, so it's substantial enough to feel quality-made but light enough to mount on plasterboard with appropriate fixings. Bear in mind the 135mm projection when positioning it — you'll want adequate clearance in hallways or beside doorways.
Does the Kiro wall light come with a bulb included?
No, the G9 bulb is not included and must be purchased separately. This allows you to choose your preferred colour temperature (warm white, cool white, etc.) and whether you want a dimmable LED or halogen version. A single lampholder means you'll need just one bulb to get it working.
Still deciding? Ask us about KiroMonday to Friday, 9am to 5pm
Complete the look

CEILING LIGHTS
Washi Stone-Effect Flush Ceiling Light — White, 60 cm

PENDANT LIGHTS
Shiro Round Disc Pendant Light — White Stone Effect, 60 cm

CEILING LIGHTS
Senna Ribbed LED Flush Ceiling Light — Dimmable, White

PENDANT LIGHTS



