Bathroom Lighting
Rivoli Ribbed Ceiling Light
Glass, Antique Brass — Ribbed glass warmth for steamy sanctuaries
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
The design house
United Kingdom
A British lighting house supplying considered, well-made fittings.
SKU: FLU-BRS-0242

Where Elegance Meets Steam
IP44 Rated
Safe for bathroom zone 2 installation
Antique Brass Finish
Classic brushed metalwork with ribbed glass
E27 ES Bulb
Standard fitting for easy bulb replacement

The fitting
- Material
- Brass / Glass
- Width
- 250 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP44 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Antique Brass
- Shape
- Dome, Cylindrical
- Height
- 260 mm
- Diameter
- 250 mm
- Depth
- 250 mm
Electrical
- Max wattage
- 11 W per lamp
- Wattage
- 11 W
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Ceiling · Surface
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · RoHS
- Bathroom zone
- Zone 2
Cover
- Returns
- 30 days
- Pack quantity
- 1

Soft Diffused Ceiling Glow
The ribbed opal glass shade disperses light evenly in all directions, creating a gentle, glare-free ambience perfect for bathroom illumination. Provides uniform overhead lighting that softly fills the space without harsh shadows.
- Direction
- Omnidirectional
- Mounting height
- Ceiling height
Works well in
- Bathroom
- Spa / Salon
- Hotel
- Bedroom
- Hallway
- Living Room
- Dining Room
- Home Office
- Bar / Café
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Mounting bracket
1× Pack of screws with wall plugs
1× Instruction manual
- Ceiling mount
- Surface
- Difficulty: easy
Questions
Is the Rivoli ribbed ceiling light suitable for bathroom zones and what IP rating does it have?
Yes, this fitting is rated IP44 and certified for use in Bathroom Zone 2. This means it's protected against water splashes from any direction, making it suitable for areas above the bath or shower (outside the direct spray zone), as well as anywhere else in the bathroom. It's an excellent choice for general bathroom lighting where moisture resistance is essential.
What type of bulb does this ceiling light use and is one included?
The Rivoli uses a standard E27 Edison Screw (ES) bulb, which is the most common large screw fitting in the UK. A bulb is not included with the fitting, so you'll need to purchase one separately. Because the fitting is dimmable, you can use either a standard E27 LED bulb or a dimmable E27 LED if you're installing it with a dimmer switch.
Can this ceiling light be dimmed?
Yes, this fitting is fully dimmable, but you'll need to ensure you use a dimmable E27 LED bulb and have a compatible LED dimmer switch installed. The ribbed glass shade diffuses light beautifully at any brightness level, making it ideal for creating ambient mood lighting in bathrooms or bedrooms.
Do I need an electrician to install this hardwired ceiling light?
Yes, as this is a hardwired ceiling fitting, installation must be carried out by a qualified electrician in compliance with UK Building Regulations Part P. The electrician will connect it directly to your mains electrical supply, typically mounting it to a standard BESA box or ceiling rose. This is not a plug-in fixture and cannot be self-installed unless you're a certified electrician.
What are the dimensions of the Rivoli ceiling light and how much space does it need?
The fitting measures 250mm in diameter and 260mm in height (drop), making it a medium-sized flush or semi-flush ceiling light. With a depth of 250mm from the ceiling, it's compact enough for bathrooms with standard ceiling heights while still providing a decorative presence. It works well in bathrooms, hallways, or smaller bedrooms where a low-profile fitting is needed.
What warranty does this antique brass ceiling light come with?
This fitting is covered by a 2-year manufacturer's warranty against defects in materials and workmanship. The warranty covers the brass and glass components of the fixture itself, though bulbs are considered consumable items and are not covered. Always retain your proof of purchase and ensure the fitting is installed by a qualified electrician to maintain warranty validity.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.

