Pendant Lights
Senja Cloud Stone-Effect Pendant Light
White, 80 cm — Sculptural softness floating overhead
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-WHT-0499

Sculptural Form, Grounded Presence
80 cm Wide
Statement scale for dining tables and hallways
Fully Dimmable
Set the mood with dimmable bulb
Stone-Effect Resin
Sculptural finish, lightweight despite the scale

The fitting
- Material
- Resin (stone effect)
- Width
- 800 mm
- Lampholder
- E27 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- White
- Shape
- Round
- Depth
- 640 mm
Electrical
- Max wattage
- 7 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge (with dimmable bulb)
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Suspended · Surface
- Suitable surfaces
- Plasterboard, timber joist, concrete ceiling
- Cable length
- 2.0 m
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1

Soft Omnidirectional Ambient Glow
The single E27 bulb radiates light in all directions through and around the sculptural stone-effect shade, creating a gentle, diffused ambient glow that illuminates the space below whilst adding soft atmospheric light to the surrounding area. Ideal suspended over dining tables or in double-height hallways where the large cloud-like form becomes a focal feature.
- Direction
- Omnidirectional
- Mounting height
- 0.7–0.9m above table surface, or 2.1–2.4m from floor in hallways
Works well in
- Living Room
- Dining Room
- Bedroom
- Restaurant
- Hotel
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Ceiling rose and suspension cable
1× Pack of mounting screws and plugs
1× Installation instructions
- Suspended mount
- Surface
- Difficulty: easy
Questions
Does the Senja cloud pendant light require an electrician to install?
Yes, this is a hardwired ceiling fitting and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your mains ceiling circuit, typically to a BESA box or existing ceiling rose position. While the installation difficulty is rated as easy for a professional, DIY installation is not permitted for hardwired lighting in the UK.
Can I dim this cloud pendant light?
Yes, the Senja is dimmable when paired with a dimmable E27 LED bulb and a trailing edge dimmer switch. You'll need to purchase both the bulb and dimmer separately, as neither is included. Trailing edge dimmers are specifically designed for LED bulbs and prevent flickering or buzzing that can occur with older leading edge dimmers.
What bulb do I need for the 80 cm cloud pendant?
This fitting requires one E27 screw-in bulb with a maximum wattage of 7W. No bulb is included, so you'll need to purchase an E27 LED bulb separately. The 7W limit is typical for modern LED fittings and will provide ample light output while keeping energy consumption low.
How big is this pendant light and what ceiling height do I need?
The fitting measures 80 cm wide and 64 cm deep, making it a substantial statement piece best suited to larger spaces like dining rooms or double-height hallways. With a 2-metre cable length, you'll have flexibility to adjust the drop height, but you should account for at least 2.1–2.4 metres of clearance above floor level once hung to avoid head strikes.
Can I use this cloud pendant in a bathroom?
No, this fitting has an IP20 rating, which means it's only suitable for indoor dry locations with no moisture exposure. IP20 fittings are not certified for bathroom zones where water spray or steam is present. For bathrooms, you'd need a minimum of IP44 or higher depending on the zone.
What warranty does the Senja cloud pendant come with?
This pendant light is covered by a 2-year manufacturer's warranty against defects in materials and workmanship. The fitting is CE marked and RoHS compliant, meeting UK safety and environmental standards. Keep your proof of purchase to make any warranty claims during the coverage period.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.





