Venice Outdoor Wall Light — Antique Copper Look, IP44
£80
Skip to product information
Click to zoom
Outdoor Lighting
Venice Outdoor Wall Light
Antique Copper Look, IP44 — Weathered elegance for courtyard evenings
£80Includes VATKlarna.3 × £27 interest-free
Secure checkout
Estimated delivery
23 – 29 September
Made to order in Denmark · Free UK delivery over £75
Key features−
Key Features
Antique copper finish adds timeless charm to exteriors
IP44 rated protection against rain and splashes
Perfect for porches, patios and garden walls
Creates warm, welcoming illumination for guests
Durable metal construction withstands British weather
IP44 OutdoorMetal, opal glass2 yr warranty30-day returns
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
The design house
Copenhagen, Denmark
A Danish design house in the Scandinavian tradition — opal glass, warm brass and clean geometry, designed in Denmark.
Made in DenmarkSKU: OWL-COP-0315
01
Nordic Craft Meets British Weather
IP44 Rated
Protected against rain and outdoor exposure
Danish Design
Nordic quality built for harsh weather
E27 Fitting
Choose your own LED bulb brightness
02
The fitting
- Material
- Metal, opal glass
- Width
- 200 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP44 · Outdoor
- Wiring
- Hardwired
- Made in
- Denmark
- Warranty
- 2 years
Full specification
Physical
- Finish
- Antique Copper
- Shape
- Lantern
- Height
- 150 mm
- Diameter
- 200 mm
- Depth
- 220 mm
- Weight
- 1.2 kg
Electrical
- Max wattage
- 25 W per lamp
- Wattage
- 25 W
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class II
Installation
- Mounting
- Wall · Surface
- Suitable surfaces
- Brick, masonry, timber cladding
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
03
Soft Diffused Wall Glow
The opal glass diffuser spreads gentle, even light outward across facades and entrances, creating a welcoming ambient glow without harsh shadows. Perfect for illuminating doorways, porches and patio seating areas with soft, decorative illumination.
- Direction
- Outward radial
- Mounting height
- 1.5–1.8m
Works well in
- Porch / Entrance
- Patio
- Garden
- Driveway
- Hotel
- Restaurant
- Outdoor
04
Where it comes from
The design house
Copenhagen, Denmark
A Danish design house in the Scandinavian tradition — opal glass, warm brass and clean geometry, designed in Denmark.
Made in Denmark
05
What's involved
Electrician requiredHardwired. Installation difficulty: easy.
Fixes to brick, masonry, timber claddingScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× Wall light fitting with antique copper shade and opal glass diffuser
1× Pack of mounting screws and plugs
1× Installation instructions
1× Pack of mounting screws and plugs
1× Installation instructions
- Wall mount
- Surface
- Difficulty: easy
06
Questions
Is the Venice wall light IP44 suitable for outdoor use in the UK?
Yes, the IP44 rating means the Venice is protected against splashing water from any direction, making it suitable for covered outdoor areas such as porches, doorways, and under eaves. It's not fully weatherproof for completely exposed positions with direct rain, but will handle typical UK weather when mounted with some overhead protection. IP44 is the standard rating for most outdoor wall lights in sheltered locations.
Does this wall light need to be installed by a qualified electrician?
Yes, the Venice is a mains-powered fitting that requires hardwiring into your outdoor electrical circuit, which falls under Part P of the Building Regulations in England and Wales. You must use a registered electrician or notify Building Control before carrying out the installation. Outdoor installations also require appropriate cable protection and may need RCD protection on the circuit.
What type of bulb does the Venice outdoor wall light take?
The Venice uses a standard E27 screw-in bulb (also called ES or Edison Screw), with a maximum wattage of 25W. You'll need to purchase the bulb separately, and we'd recommend a warm white LED bulb (2700K-3000K) to complement the antique copper finish. LED bulbs rated at 4-6W will provide ample light while staying well within the 25W limit.
Can I use a dimmable bulb with this fitting?
The fitting itself doesn't prevent you from using a dimmable LED bulb, but you'll need to ensure your wall switch is replaced with a compatible LED dimmer switch for it to work properly. Standard dimmer switches designed for old incandescent bulbs often don't work well with LEDs and can cause flickering. Check that both your dimmer switch and LED bulb are compatible with each other.
What are the dimensions of the Venice wall light?
The specific dimensions aren't provided in the product specifications, but as a traditional outdoor wall lantern style, you should expect a depth projection of approximately 20-30cm from the wall and a height of 25-35cm. If precise measurements are critical for your installation space, we recommend contacting us before purchase to confirm the exact dimensions.
Will the antique copper finish rust or deteriorate outdoors?
The antique copper finish is a decorative coating designed to withstand outdoor conditions within its IP44 rating, though some natural weathering and patina development is normal and often adds to the vintage aesthetic. The fitting is built to Danish design standards for harsh Nordic weather, so it's engineered for durability. Regular cleaning with a damp cloth will help maintain the finish, but some natural aging should be expected with any outdoor metallic fixture.
Complete the Look
Products that pair well with this light
OUTDOOR LIGHTING
Ted Box Outdoor Post Aluminium Lantern — Black
BlackE27 ES1 lampholder
£75
In stock
View product →
Signature
Signature
Made or designed by Europe’s independent ateliers — small runs, real materials, hand-finished. The top of the Enso range.
OUTDOOR LIGHTING
Arcus Outdoor Wall Light — Matt Black, Danish Design
Made in Denmark
Matt BlackE27 ES1 lampholder
£65
In stock
View product →
Don't forget your bulbSold separately · E27 ES · 25W max
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.