Ceiling Lights
Washi Stone-Effect Flush Ceiling Light
White, 60 cm — Soft texture meets minimalist calm
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: FLU-WHT-0505
Sculptural Calm, Overhead
Stone-effect resin
Wabi-sabi inspired matt white textured finish
60 cm flush mount
Perfect for low ceilings without pendants
Fully dimmable
Set the mood with dimmable bulbs
The fitting
- Material
- Resin (stone effect)
- Lampholder
- E27 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- White
- Shape
- Dome
- Height
- 310 mm
- Diameter
- 600 mm
Electrical
- Max wattage
- 7 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge (with dimmable bulb)
- Voltage
- 220-240V
- Electrical class
- Class I
Installation
- Mounting
- Ceiling · Surface
- Suitable surfaces
- Plasterboard, timber joist, concrete ceiling
- Difficulty
- Easy
- Electrician
- Recommended — hardwired
Compliance
- Certification
- CE · RoHS
Cover
- Returns
- 30 days
- Pack quantity
- 1
Soft Diffused Ambient Glow
The domed shade gently diffuses light downwards and outwards in a wide, even spread that fills the room with soft ambient illumination. Perfect for bedrooms, living rooms or hallways where you want gentle, unfocused light without harsh shadows.
- Direction
- Downward diffused
- Mounting height
- Ceiling height
Works well in
- Living Room
- Bedroom
- Dining Room
- Hallway
- Home Office
- Hotel
- Office
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
1× Installation instructions
- Ceiling mount
- Surface
- Difficulty: easy
Questions
Does the Washi 60 cm flush ceiling light require an electrician to install?
Yes, as this is a hardwired ceiling fitting, installation must comply with Building Regulations Part P in England and Wales. Unless you are a qualified electrician or competent person, you'll need to hire a registered electrician to connect it safely to your mains circuit and issue the necessary certification.
Can I dim this stone-effect flush ceiling light?
Yes, the Washi is dimmable when used with a compatible dimmable E27 bulb and a trailing edge dimmer switch. You'll need to ensure both the bulb you choose and your dimmer are compatible with each other — LED bulbs typically require trailing edge (not leading edge) dimmers for flicker-free performance.
What size bulb does the 60 cm Washi ceiling light take and is one included?
This fitting takes a single E27 screw-in bulb with a maximum wattage of 7W, which suits modern LED bulbs perfectly. A bulb is not included in the box, so you'll need to purchase an E27 LED separately — choose a dimmable one if you plan to use a dimmer switch.
Is this flush light suitable for a bathroom or wet room?
No, the Washi has an IP20 rating, which means it's only protected against solid objects and offers no moisture protection. It's designed for dry indoor spaces like bedrooms, living rooms and hallways — not bathrooms, wet rooms or any area where it may be exposed to moisture or steam.
How big is the 60 cm Washi and will it suit a low ceiling?
The fitting measures 600 mm in diameter and projects 310 mm down from the ceiling, making it quite a deep dome. It's a flush-mount design ideal for rooms where you want to avoid a pendant drop, but you'll need to account for the 31 cm depth — particularly important in rooms with lower ceilings or where headroom is a concern.
What warranty does this stone-effect ceiling light come with?
The Washi is covered by a 2-year manufacturer's warranty against defects in materials and workmanship. It is both CE marked and RoHS compliant, meeting UK safety and environmental standards for electrical products.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.





