Kiro Ceramic Wall Light — Simple Black, Large
£253
Skip to product information
Materials
Ceramic
IP20 Indoor
2 yr warranty
Moderate install
Click to zoom
Wall Lights
Kiro Ceramic Wall Light
Simple Black, Large — Sculptural shadow play in matte black
£253Includes VATKlarna.3 × £84 interest-free
Size
Colour
Secure checkout
Made to order
Estimated delivery 21 September – 12 October
Ordered in from our European design house · Free UK delivery over £75
Key features−
Key Features
Handmade ceramic wall light, cast and glazed by Patrícia Lobo in Portugal
Cone shade washes light up and down the wall — soft, warm and glare-free
Simple Black glaze — a matt, light-absorbing black, with hand-finished variation in every piece
Large: 235 x 135 x 200mm (w x d x h), 900g
Takes 1 x G9 bulb up to 40W (not included) — dimmable with a compatible dimmer
IP20 IndoorCeramic2 yr warranty30-day returns
Delivery & Returns
UK-stocked designs — dispatched within 1–2 working days by DPD or Royal Mail.
Made-to-order pieces — hand-finished by our European makers and delivered in 10–14 days. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: WAL-BLK-0429
01
The fitting
- Material
- Ceramic
- Width
- 235 mm
- Lampholder
- G9 × 1
- IP rating
- IP20 · Indoor
- Wiring
- Hardwired
- Warranty
- 2 years
Full specification
Physical
- Finish
- Black
- Height
- 200 mm
- Depth
- 135 mm
- Weight
- 0.9 kg
Electrical
- Max wattage
- 40 W per lamp
- Bulb included
- No — sold separately
- Dimmable
- Yes
- Voltage
- 220-240V
- Electrical class
- Class I
Cover
- Returns
- 30 days
- Pack quantity
- 1
02
What's involved
Electrician requiredHardwired. Installation difficulty: moderate.
Wall fixingsScrews and plugs for these surfaces are supplied in the box. For plasterboard without a stud behind, use a suitable cavity fixing rated for the weight.
In the box1× Ceramic wall light fitting
1× Pack of mounting screws and plugs
1× Installation instructions
1× Pack of mounting screws and plugs
1× Installation instructions
- Wall mount
- Surface
- Difficulty: moderate
03
Up & Down Wall Wash
The cone-shaped ceramic shade directs soft, glare-free light both upwards and downwards, creating gentle washes of illumination that highlight the wall's texture above and below. This balanced reflected glow adds depth and ambience to hallways, living rooms, and bedrooms without harsh direct light.
Works well in
- Living Room
- Bedroom
- Hallway
- Dining Room
- Restaurant
- Hotel
- Bar / Café
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
04
Where it comes from
05
Questions
Does the Kiro Ceramic Wall Light need to be installed by an electrician?
Yes, the Kiro is hardwired directly into your mains wiring and must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects to a standard BESA box or backplate and requires permanent 230V mains connection. You cannot simply plug this light in — it's a fixed installation that typically replaces an existing wall light.
Can I use a dimmer switch with this black ceramic wall light?
Yes, the Kiro is dimmable, but you'll need to fit a compatible G9 LED bulb (not included) and ensure your dimmer switch is designed for LED loads. Not all dimmer switches work well with LED bulbs, so check compatibility to avoid flickering. Traditional incandescent or halogen G9 bulbs will also dim without issue if you prefer warmer, more reliable dimming performance.
What size G9 bulb fits the Kiro wall light?
The Kiro takes a single standard G9 capsule bulb with a maximum recommended wattage shown on the fitting (typically 40W for halogen or equivalent LED). Choose a compact G9 LED of around 3–5W for energy efficiency, ensuring it fits within the ceramic cone shade. Avoid oversized G9 bulbs with large heat sinks, as the 135mm depth may not accommodate bulkier LED designs.
Can this wall light be used in a bathroom?
No, the Kiro has an IP20 rating, meaning it's not protected against moisture and is only suitable for dry indoor areas. For bathrooms, you would need a fitting rated IP44 or higher depending on the zone. This wall light is ideal for hallways, living rooms, bedrooms, or dining areas where no moisture is present.
How big is the large Kiro wall light?
The large Kiro measures 235mm wide, 200mm tall, and projects 135mm from the wall. At 900g it's relatively lightweight despite being solid ceramic, but you'll still want to ensure it's fixed securely into a solid wall or stud. The cone shape means it occupies visual space above and below the mounting point, so allow at least 250–300mm of clear wall height for best effect.
What kind of light does this ceramic wall light produce?
The Kiro casts light both upward and downward through its cone-shaped shade, creating a soft wash on the wall rather than projecting light into the room. The quality and colour temperature of the light depend entirely on your choice of G9 bulb — opt for 2700K for warm white or 3000K for neutral white. Because the light is indirect and glare-free, it works beautifully for ambient or accent lighting rather than task lighting.
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
01
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
02
From Europe’s quiet workshops
Copenhagen brass, Milanese plaster, hand-woven French rattan — small independent design houses, named by place, plainly.
Designed in Europe. Named honestly.
03
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
04
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.