Pendant Lights
Ando Concrete Pendant Light
Natural Grey, Jar — Industrial charm meets raw elegance
Key features−
Key Features
Delivery & Returns
Ordered in for you — we hold no warehouse stock. Every light is supplied direct from its maker, and made-to-order pieces are hand-finished before dispatch. Each product shows its own delivery estimate above.
UK mainland delivery — FREE on orders over £75, £7.95 below.
Returns — free within 30 days. Item must be unused and in original packaging.
What's in the Box
Product Care Guide
Plaster
Dust with a soft, dry cloth only. Plaster is porous, so avoid all liquid cleaners — they'll stain or mark the surface. Raw plaster fittings can be painted: use a matte emulsion in two thin coats, allowing each to dry fully before powering on. Don't install in bathrooms or other damp areas unless the IP rating allows it.
Brass & metal
Brass develops a natural patina over time, which most people prefer. To keep the current finish, wipe gently with a soft, dry cloth. For a brighter look, use a brass-specific polish sparingly. Never use lemon, vinegar, or abrasive cleaners — these damage lacquered brass irreversibly. Polished chrome and nickel finishes can be wiped with a damp microfibre cloth.
Glass
Wipe with a soft, damp cloth and dry thoroughly to avoid water marks. For stubborn marks, a mild glass cleaner is fine. Always ensure the fitting is switched off and fully cool before cleaning.
Fabric shades
Dust with a soft brush or vacuum on the lowest setting using an upholstery attachment. Avoid wet cleaning — fabric shades can stain, warp, or shrink. Spot-clean small marks only with a barely-damp microfibre cloth.
Ceramic
Glazed ceramic can be wiped with a soft, damp cloth and a mild soap solution. Unglazed or matte ceramic should be kept dry and dusted only. Always ensure the fitting is switched off and cool first.
Before you clean
Switch off at the wall and let the fitting cool fully. Never spray cleaner directly onto a fitting — apply to a cloth first. If your fitting has visible wiring, electrical components, or LED drivers exposed, keep moisture well away from these areas.
SKU: PEN-MIX-0331

Honestly Made, Beautifully Raw
Natural Concrete Shade
Honest raw cement with soft matt finish
180mm Jar Shade
Statement size for kitchen islands and dining
Adjustable Drop 129cm
Shorten cable at installation to suit ceiling

The fitting
- Material
- Concrete
- Width
- 180 mm
- Lampholder
- E27 ES × 1
- IP rating
- IP20
Full specification
Physical
- Finish
- Natural Concrete
- Height
- 1290 mm
- Diameter
- 180 mm
- Depth
- 180 mm
- Weight
- 0.93 kg
Electrical
- Wattage
- 40 W
- Bulb included
- No — sold separately
- Dimmable
- Yes · Trailing edge
- Voltage
- 220-240V
Installation
- Mounting
- Suspended
- Suitable surfaces
- Plasterboard, timber joist, concrete ceiling
- Difficulty
- Moderate
- Electrician
- Recommended — hardwired
- Fixings supplied
- Yes
Cover
- Returns
- 30 days
- Pack quantity
- 1

Focused Downward Pool
The jar-shaped concrete shade directs light downwards in a concentrated pool, ideal for illuminating dining tables or kitchen islands. The solid cement construction prevents any upward or lateral light spill, creating dramatic shadows and a moody, intimate ambience beneath.
- Direction
- Downlight
- Mounting height
- 1.8–2.1m
Works well in
- Living Room
- Dining Room
- Bedroom
- Kitchen
- Restaurant
- Bar / Café
- Hotel
Not for bathrooms or outdoors: this is IP20, rated for dry indoor use only.
Why we chose it
Chosen for its proportions, its finish and the quality of its light — a quiet, architectural line that earns its place at any price.
Finish, inspected
Coating depth, seam lines and edges checked against a reference sample before listing.
Safety, certified
CE marked and RoHS compliant — documentation held on file.
Light, measured
Beam spread and colour temperature checked for a warm, even light with no flicker.
Backed, in writing
Covered by the Enso warranty and 30-day returns — the same promise as every light we sell.

What's involved
1× Pack of mounting screws and plugs
1× Installation instructions
- Suspended mount
- Difficulty: moderate
Questions
Does the Ando concrete pendant require an electrician to install?
Yes, hardwired pendant lights must be installed by a qualified electrician in compliance with UK Building Regulations Part P. The fitting connects directly to your ceiling rose or BESA box and requires mains wiring, so professional installation is both a legal requirement and a safety necessity. DIY installation is not permitted for mains-voltage ceiling fittings in the UK.
What type of bulb does the Ando concrete pendant use?
The Ando uses a single E27 Edison screw bulb, which is the standard large screw fitting widely available in the UK. You can choose any E27 LED, halogen, or filament bulb up to the fitting's maximum wattage to achieve your preferred brightness and colour temperature. E27 bulbs are stocked by most supermarkets, DIY stores, and lighting retailers.
Can I use a dimmer switch with this concrete pendant light?
Dimming capability depends entirely on the bulb you choose, not the fitting itself. If you install a dimmable E27 LED bulb and have a compatible LED dimmer switch fitted, the Ando will dim without issue. Always check your bulb packaging confirms it's dimmable and match it to an appropriate dimmer to avoid flickering or buzzing.
Is the Ando pendant suitable for bathroom use?
No, the Ando has an IP20 rating, meaning it offers no moisture protection and is only suitable for dry indoor environments. UK bathroom zones require minimum IP44 (or higher) ratings depending on proximity to water sources, so this fitting cannot be safely or legally installed in a bathroom. It's ideal for living rooms, bedrooms, dining areas, and hallways.
What are the dimensions of the Ando concrete pendant light?
Specific dimensions are not provided in the technical specifications, but as a jar-style concrete pendant, the Ando features a compact cylindrical or jar-shaped shade in natural grey concrete. For exact measurements including drop height, diameter, and ceiling canopy size, please contact our customer service team before purchasing if space is a concern.
What colour temperature and brightness should I choose for this fitting?
Since the Ando accepts any E27 bulb, you control both colour temperature and brightness through your bulb choice. For living spaces, 2700K-3000K (warm white) creates a cosy atmosphere, while 4000K (cool white) suits task-oriented areas. A 6-10W LED E27 bulb (approximately 470-806 lumens) typically provides adequate ambient lighting for a pendant of this style.
Complete the Look
Products that pair well with this light

PENDANT LIGHTS
Ando Concrete Pendant Light — Natural Grey, Cylinder

CEILING LIGHTS
Gabriel Ceiling Light — Paintable White Plaster

PENDANT LIGHTS
Nanzo XXL Rattan Pendant Light — Natural Woven, 85cm
Designed in France
The Enso Standard
Anyone can sell you a light.
We’d rather sell you the right one.
Lighting, considered.
Chosen, not stocked
For every piece here, we passed on hundreds. If a fitting doesn’t earn its place, it isn’t here.
Curation is mostly the art of saying no.
Held to one standard
Copenhagen brass or precision-built LED — every piece is vetted the same way: finish, build, light quality, safety. If it doesn’t pass, it doesn’t stay.
The standard doesn’t care what a light costs.
Nothing left to guess
Every dimension, bulb, IP rating and install note published before you buy — you and your electrician know exactly what arrives.
The spec sheet is the love letter.
Backed, properly
Two-year warranty as standard, 30-day returns. If something isn’t right, we’d rather know — and put it right.
A fitting should outlast the fashion that chose it.








