Taoka

The Taoka requires three E27 screw-in bulbs (often called Edison Screw), which are not included with the fitting. Each lampholder supports a maximum of 12W, so you can use LED bulbs up to this wattage. For dimmability, choose E27 bulbs specifically marked as dimmable and pair them with a trailing edge dimmer switch.

Yes, a qualified electrician is required for installation. As a hardwired Class I fitting, it must be connected directly to your mains electrical circuit and properly earthed, which falls under Part P of the UK Building Regulations. The installation itself is rated as easy for a competent electrician, suitable for plasterboard, timber joist, or concrete ceilings.

Yes, the height is adjustable along the 1.5-metre suspension cable, allowing you to position the shades at the ideal height above your dining table or kitchen island. The total height including the ceiling plate is 1500mm, but you can shorten this during installation to suit your ceiling height and the surface below.

No, this fitting is not suitable for bathrooms. It has an IP20 rating, which provides protection against solid objects only and no protection against moisture. For bathroom zones, you would need a fitting rated IP44 or higher depending on the specific zone requirements.

The Taoka measures 500mm (50cm) in width, making it well-suited to medium-sized dining tables, kitchen islands, or console tables typically between 120–180cm long. Its linear arrangement of three shades creates balanced illumination across the length without overwhelming smaller spaces or appearing undersized in larger rooms.

The Taoka is covered by a 2-year manufacturer's warranty. This protects against manufacturing defects and material faults, though it does not cover damage from incorrect installation, misuse, or natural wear to the bulbs themselves (which are sold separately).